Schneider Electric BMH1002P37F1A Motor 100Mm Iec 6,2Nm Ip65/67 2060W Key
SKU:
BMH1002P37F1A
UPC:
3606485196251
MPN:
Condition:
New
Number Of Motor Poles:
10
Holding Torque:
5.5 N.m holding brake
[Us] Rated Supply Voltage:
480 V
Motor Flange Size:
100 mm
Maximum Current Irms:
18 A LXM32.D18N4
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Peak Stall Torque:
18.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 18.4 N.m LXM32.D18N4 6 A, 480 V, three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Environmental Disclosure:
ENVPEP111002EN
Phase:
three phase
Holding Brake:
with
Length:
202.3 mm
Stator Inductance:
7.5 mH 20 °C
Torque Constant:
1.2 N.m/A 120 °C
Nominal Torque:
3.9 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.9 N.m LXM32.D18N4 6 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
Range Compatibility:
Lexium 32
Second Shaft:
without second shaft end
Nominal Speed:
4000 rpm LXM32.D18N4 6 A, 400 V, three phase || 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Number Of Mounting Holes:
4
Mercury Free:
Yes
Mounting Support:
international standard flange
Shaft End:
keyed
Continuous Power:
2.36 W
Type Of Cooling:
natural convection
Brake Pull-In Power:
12 W
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Rotor Inertia:
6.77 kg.cm²
Device Short Name:
BMH
Key Width:
30 mm
Nominal Output Power:
1600 W LXM32.D18N4 6 A, 400 V, three phase || 1600 W LXM32.D18N4 6 A, 480 V, three phase
Stator Electrical Time Constant:
5 ms 20 °C
Maximum Mechanical Speed:
6000 rpm
Shaft Length:
40 mm
Circle Diameter Of The Mounting Holes:
115 mm
Pvc Free:
Yes
Net Weight:
6.4 kg
Shaft Diameter:
19 mm
Maximum Permanent Current:
18.23 A
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Mounting Holes Diameter:
9 mm
Warranty:
18 months
Number Of Motor Stacks:
2
Centring Collar Diameter:
95 mm
Rohs Exemption Information:
Yes
Back Emf Constant:
77 V/krpm 120 °C
Centring Collar Depth:
3.5 mm
Feedback Type:
multiturn SinCos Hiperface
China Rohs Regulation:
X
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
6.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 6.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Product Or Component Type:
servo motor
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
