Schneider Electric BMH1002T11F2A Motor 100Mm Iec 6Nm Ip54 1910W Key
SKU:
BMH1002T11F2A
UPC:
3606485200934
MPN:
Condition:
New
Type Of Cooling:
natural convection
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Net Weight:
6.4 kg
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Stator Inductance:
2.7 mH 20 °C
Brake Pull-In Power:
12 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Torque:
5.5 N.m holding brake
Centring Collar Depth:
3.5 mm
Warranty:
18 months
Range Compatibility:
Lexium 32
Ip Degree Of Protection:
IP54 standard
Speed Feedback Resolution:
131072 points/turn
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Mounting Holes Diameter:
9 mm
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Stator Electrical Time Constant:
5 ms 20 °C
Torque Constant:
0.72 N.m/A 120 °C
Maximum Permanent Current:
30.24 A
Continuous Stall Current:
8.65 A
Shaft End:
keyed
Device Short Name:
BMH
Product Or Component Type:
servo motor
Continuous Power:
2.39 W
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Circle Diameter Of The Mounting Holes:
115 mm
Motor Flange Size:
100 mm
Sustainable Offer Status:
Green Premium product
Stator Resistance:
0.54 Ohm 20 °C
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Holding Brake:
with
Shaft Diameter:
19 mm
Environmental Disclosure:
ENVPEP111002EN
Length:
202.3 mm
Number Of Motor Stacks:
2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rotor Inertia:
6.77 kg.cm²
Phase:
three phase
Maximum Axial Force Fa:
0.2 x Fr
Back Emf Constant:
46.2 V/krpm 120 °C
Shaft Length:
40 mm
Feedback Type:
single turn SinCos Hiperface
Second Shaft:
without second shaft end
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Mechanical Speed:
6000 rpm
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
