Schneider Electric BMH1002T16F1A Motor 100Mm Iec 6Nm Ip54 1910W Key Enc
SKU:
BMH1002T16F1A
UPC:
3.60649E+12
MPN:
Condition:
New
Key Width:
30 mm
Circularity Profile:
N/A
Phase:
three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rotor Inertia:
6.77 kg.cm²
China Rohs Regulation:
X
Shaft Diameter:
19 mm
Electrical Connection:
straight connectors
Back Emf Constant:
46.2 V/krpm 120 °C
Environmental Disclosure:
ENVPEP111002EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mercury Free:
Yes
Brake Pull-In Power:
12 W
Pvc Free:
Yes
Feedback Type:
single turn SinCos Hiperface
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Number Of Mounting Holes:
4
Torque Constant:
0.72 N.m/A 120 °C
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Shaft Length:
40 mm
Maximum Permanent Current:
30.24 A
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Product Or Component Type:
servo motor
Shaft End:
keyed
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Ip Degree Of Protection:
IP54 standard
Type Of Cooling:
natural convection
Net Weight:
6.4 kg
Stator Inductance:
2.7 mH 20 °C
[Us] Rated Supply Voltage:
240 V
Circle Diameter Of The Mounting Holes:
115 mm
Sustainable Offer Status:
Green Premium product
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Mounting Support:
international standard flange
Maximum Axial Force Fa:
0.2 x Fr
Stator Electrical Time Constant:
5 ms 20 °C
Continuous Power:
2.39 W
Mounting Holes Diameter:
9 mm
Maximum Mechanical Speed:
6000 rpm
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Number Of Motor Poles:
10
Stator Resistance:
0.54 Ohm 20 °C
Number Of Motor Stacks:
2
Holding Torque:
5.5 N.m holding brake
Range Compatibility:
Lexium 32
Holding Brake:
with
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Continuous Stall Current:
8.65 A
Second Shaft:
without second shaft end
Centring Collar Depth:
3.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
