Schneider Electric BMH1002T26F2A Motor 100Mm Iec 6,2Nm Ip65/67 1910W No
SKU:
BMH1002T26F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Support:
international standard flange
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Shaft Length:
40 mm
Stator Resistance:
0.54 Ohm 20 °C
[Us] Rated Supply Voltage:
240 V
Sustainable Offer Status:
Green Premium product
Speed Feedback Resolution:
32768 points/turn
Electrical Connection:
rotatable right-angled connectors
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Maximum Axial Force Fa:
0.2 x Fr
Mercury Free:
Yes
Rotor Inertia:
6.77 kg.cm²
Warranty:
18 months
Holding Torque:
5.5 N.m holding brake
Continuous Power:
2.39 W
Range Compatibility:
Lexium 32
Maximum Mechanical Speed:
6000 rpm
Torque Constant:
0.72 N.m/A 120 °C
Circularity Profile:
N/A
Back Emf Constant:
46.2 V/krpm 120 °C
Stator Electrical Time Constant:
5 ms 20 °C
Product Or Component Type:
servo motor
Brake Pull-In Power:
12 W
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Continuous Stall Current:
8.65 A
Holding Brake:
with
Stator Inductance:
2.7 mH 20 °C
Number Of Motor Stacks:
2
Net Weight:
6.4 kg
Centring Collar Depth:
3.5 mm
Shaft End:
smooth shaft
Centring Collar Diameter:
95 mm
Length:
202.3 mm
Second Shaft:
without second shaft end
Number Of Motor Poles:
10
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Maximum Permanent Current:
30.24 A
Motor Flange Size:
100 mm
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Number Of Mounting Holes:
4
Mounting Holes Diameter:
9 mm
Circle Diameter Of The Mounting Holes:
115 mm
Phase:
three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Diameter:
19 mm
Environmental Disclosure:
ENVPEP111002EN
Type Of Cooling:
natural convection
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...
