Schneider Electric BMH1002T32F2A Motor 100Mm Iec 6,2Nm Ip65/67 1910W Key
SKU:
BMH1002T32F2A
UPC:
3606485197449
MPN:
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Pvc Free:
Yes
Maximum Permanent Current:
30.24 A
Feedback Type:
multiturn SinCos Hiperface
Environmental Disclosure:
ENVPEP111002EN
Centring Collar Depth:
3.5 mm
Centring Collar Diameter:
95 mm
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Device Short Name:
BMH
Key Width:
30 mm
Holding Torque:
5.5 N.m holding brake
Holding Brake:
with
Mounting Holes Diameter:
9 mm
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Rotor Inertia:
6.77 kg.cm²
Maximum Axial Force Fa:
0.2 x Fr
Number Of Motor Poles:
10
Mercury Free:
Yes
Stator Electrical Time Constant:
5 ms 20 °C
Shaft End:
keyed
Continuous Power:
2.39 W
[Us] Rated Supply Voltage:
240 V
Phase:
three phase
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Circularity Profile:
N/A
Circle Diameter Of The Mounting Holes:
115 mm
Torque Constant:
0.72 N.m/A 120 °C
Net Weight:
6.4 kg
China Rohs Regulation:
X
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Brake Pull-In Power:
12 W
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Motor Flange Size:
100 mm
Sustainable Offer Status:
Green Premium product
Back Emf Constant:
46.2 V/krpm 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Mechanical Speed:
6000 rpm
Electrical Connection:
rotatable right-angled connectors
Second Shaft:
without second shaft end
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Number Of Mounting Holes:
4
Mounting Support:
international standard flange
Rohs Exemption Information:
Yes
Length:
202.3 mm
Number Of Motor Stacks:
2
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Range Compatibility:
Lexium 32
Shaft Length:
40 mm
Warranty:
18 months
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Stator Resistance:
0.54 Ohm 20 °C
Shaft Diameter:
19 mm
Continuous Stall Current:
8.65 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...
