Schneider Electric BMH1002T37F2A Motor 100Mm Iec 6,2Nm Ip65/67 1910W Key
SKU:
BMH1002T37F2A
UPC:
3606485197753
MPN:
Condition:
New
Maximum Axial Force Fa:
0.2 x Fr
Feedback Type:
multiturn SinCos Hiperface
Warranty:
18 months
Number Of Motor Poles:
10
Continuous Stall Current:
8.65 A
Rohs Exemption Information:
Yes
Mounting Holes Diameter:
9 mm
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Shaft Length:
40 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Electrical Time Constant:
5 ms 20 °C
Rotor Inertia:
6.77 kg.cm²
[Us] Rated Supply Voltage:
240 V
Pvc Free:
Yes
Maximum Mechanical Speed:
6000 rpm
Motor Flange Size:
100 mm
Net Weight:
6.4 kg
Circularity Profile:
N/A
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Continuous Power:
2.39 W
Product Or Component Type:
servo motor
Key Width:
30 mm
Stator Resistance:
0.54 Ohm 20 °C
Number Of Motor Stacks:
2
Stator Inductance:
2.7 mH 20 °C
Electrical Connection:
rotatable right-angled connectors
Number Of Mounting Holes:
4
Environmental Disclosure:
ENVPEP111002EN
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Length:
202.3 mm
Maximum Permanent Current:
30.24 A
Type Of Cooling:
natural convection
Centring Collar Depth:
3.5 mm
Range Compatibility:
Lexium 32
Holding Brake:
with
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Shaft Diameter:
19 mm
Second Shaft:
without second shaft end
Sustainable Offer Status:
Green Premium product
Mounting Support:
international standard flange
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Torque Constant:
0.72 N.m/A 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Device Short Name:
BMH
China Rohs Regulation:
X
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Centring Collar Diameter:
95 mm
Brake Pull-In Power:
12 W
Shaft End:
keyed
Phase:
three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Circle Diameter Of The Mounting Holes:
115 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Holding Torque:
5.5 N.m holding brake
Back Emf Constant:
46.2 V/krpm 120 °C
Mercury Free:
Yes
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...
