Schneider Electric BMH1003P26A2A Motor 100Mm Iec 8,4Nm Ip65/67 2730W No
SKU:
BMH1003P26A2A
UPC:
3606485196602
MPN:
Condition:
New
Peak Stall Torque:
25.1 N.m LXM32.D30N4 10 A, 400 V, three phase || 25.1 N.m LXM32.D30N4 10 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
Mounting Support:
international standard flange
Net Weight:
6.5 kg
Stator Inductance:
4 mH 20 °C
Centring Collar Depth:
3.5 mm
Shaft End:
smooth shaft
Length:
192.6 mm
Back Emf Constant:
63.5 V/krpm 120 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Current Irms:
29.1 A LXM32.D30N4
Device Short Name:
BMH
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Speed:
4000 rpm LXM32.D30N4 10 A, 400 V, three phase || 4000 rpm LXM32.D30N4 10 A, 480 V, three phase
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
China Rohs Regulation:
X
Phase:
three phase
Maximum Permanent Current:
29.1 A
Electrical Connection:
rotatable right-angled connectors
Product Compatibility:
LXM32.D30N4 400...480 V three phase
Number Of Motor Poles:
10
Speed Feedback Resolution:
32768 points/turn
Mercury Free:
Yes
Range Compatibility:
Lexium 32
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circle Diameter Of The Mounting Holes:
115 mm
Torque Constant:
1 N.m/A 120 °C
Number Of Motor Stacks:
3
Stator Resistance:
0.63 Ohm 20 °C
Maximum Axial Force Fa:
0.2 x Fr
Feedback Type:
single turn SinCos Hiperface
Nominal Torque:
6.2 N.m LXM32.D30N4 10 A, 400 V, three phase || 6.2 N.m LXM32.D30N4 10 A, 480 V, three phase
Nominal Output Power:
2700 W LXM32.D30N4 10 A, 400 V, three phase || 2700 W LXM32.D30N4 10 A, 480 V, three phase
Maximum Mechanical Speed:
6000 rpm
Pvc Free:
Yes
Mounting Holes Diameter:
9 mm
Number Of Mounting Holes:
4
Circularity Profile:
N/A
Continuous Stall Current:
7.69 A
Centring Collar Diameter:
95 mm
Second Shaft:
without second shaft end
Shaft Length:
40 mm
Rotor Inertia:
9.37 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Motor Flange Size:
100 mm
Environmental Disclosure:
ENVPEP111002EN
Stator Electrical Time Constant:
6.3 ms 20 °C
[Us] Rated Supply Voltage:
480 V
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Warranty:
18 months
Holding Brake:
without
Continuous Power:
3.3 W
Continuous Stall Torque:
8.4 N.m LXM32.D30N4 10 A, 400 V, three phase || 8.4 N.m LXM32.D30N4 10 A, 480 V, three phase
