Schneider Electric BMH1003T12A1A Motor 100Mm Iec 8,4Nm Ip54 2150W Key
SKU:
BMH1003T12A1A
UPC:
3606485197777
MPN:
Condition:
New
Circle Diameter Of The Mounting Holes:
115 mm
Length:
192.6 mm
Net Weight:
6.5 kg
Product Compatibility:
LXM32.D30M2 230 V single phase
Shaft Diameter:
19 mm
Continuous Stall Current:
0.416666666666667
Back Emf Constant:
54.8 V/krpm 120 °C
Range Compatibility:
Lexium 32
Circularity Profile:
N/A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Mounting Holes:
4
Torque Constant:
0.851 N.m/A 120 °C
Warranty:
18 months
Peak Stall Torque:
22.8 N.m LXM32.D30M2 10 A, 230 V, single phase
Continuous Stall Torque:
8.2 N.m LXM32.D30M2 10 A, 230 V, single phase
Type Of Cooling:
natural convection
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase
Number Of Motor Stacks:
3
Shaft Length:
40 mm
Mounting Support:
international standard flange
Ip Degree Of Protection:
IP54 standard
Product Or Component Type:
servo motor
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Nominal Torque:
5.6 N.m LXM32.D30M2 10 A, 230 V, single phase
[Us] Rated Supply Voltage:
240 V
Second Shaft:
without second shaft end
Maximum Permanent Current:
33.85 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Holding Brake:
without
Mounting Holes Diameter:
9 mm
Centring Collar Depth:
3.5 mm
Device Short Name:
BMH
Feedback Type:
multiturn SinCos Hiperface
Rotor Inertia:
9.37 kg.cm²
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
