Schneider Electric BMH1403P36A2A Motor 140Mm Iec 25Nm Ip65/67 4700W Key
SKU:
BMH1403P36A2A
UPC:
3606485208251
MPN:
Condition:
New
Shaft Diameter:
24 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
4700 W LXM32.D72N4 24 A, 400 V, three phase || 4700 W LXM32.D72N4 24 A, 480 V, three phase
Continuous Power:
4.8 W
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Centring Collar Depth:
3.5 mm
Mounting Holes Diameter:
11 mm
Length:
232 mm
Phase:
three phase
Stator Electrical Time Constant:
13.6 ms 20 °C
Maximum Axial Force Fa:
0.2 x Fr
Electrical Connection:
rotatable right-angled connectors
Torque Constant:
1.34 N.m/A 120 °C
Centring Collar Diameter:
130 mm
Maximum Radial Force Fr:
2420 N 1000 rpm || 1920 N 2000 rpm || 1680 N 3000 rpm
Key Width:
40 mm
Circle Diameter Of The Mounting Holes:
165 mm
China Rohs Regulation:
X
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
62.3 A LXM32.D72N4
Continuous Stall Torque:
24 N.m LXM32.D72N4 24 A, 400 V, three phase || 24 N.m LXM32.D72N4 24 A, 480 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Feedback Type:
single turn SinCos Hiperface
Device Short Name:
BMH
Holding Brake:
without
Continuous Stall Current:
18 A
Shaft End:
keyed
Stator Resistance:
0.22 Ohm 20 °C
Stator Inductance:
3 mH 20 °C
Motor Flange Size:
140 mm
Circularity Profile:
N/A
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Net Weight:
16 kg
Number Of Motor Poles:
10
Maximum Permanent Current:
62.3 A
Speed Feedback Resolution:
32768 points/turn
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111002EN
Rohs Exemption Information:
Yes
Shaft Length:
50 mm
Nominal Torque:
13.92 N.m LXM32.D72N4 24 A, 400 V, three phase || 13.92 N.m LXM32.D72N4 24 A, 480 V, three phase
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Number Of Mounting Holes:
4
Warranty:
18 months
Range Compatibility:
Lexium 32
Sustainable Offer Status:
Green Premium product
Second Shaft:
without second shaft end
Rotor Inertia:
47.5 kg.cm²
Nominal Speed:
3000 rpm LXM32.D72N4 24 A, 400 V, three phase || 3000 rpm LXM32.D72N4 24 A, 480 V, three phase
Peak Stall Torque:
71.8 N.m LXM32.D72N4 24 A, 400 V, three phase || 71.8 N.m LXM32.D72N4 24 A, 480 V, three phase
[Us] Rated Supply Voltage:
480 V
Mounting Support:
international standard flange
Maximum Mechanical Speed:
4000 rpm
Back Emf Constant:
85.9 V/krpm 120 °C
Number Of Motor Stacks:
3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
