Schneider Electric BMH1902P31F2A Motor 190Mm Iec 48Nm Ip65/67 6.1Kw Key
SKU:
BMH1902P31F2A
UPC:
3606485264172
MPN:
Condition:
New
Number Of Motor Poles:
10
Length:
310 mm
Continuous Stall Current:
30.8 A
Mounting Holes Diameter:
14 mm
Continuous Stall Torque:
37.4 N.m LXM32.D72N4 24 A, 400 V, three phase || 37.4 N.m LXM32.D72N4 24 A, 480 V, three phase || 48 N.m LXM32MD85N4 32 A, 400 V, three phase || 48 N.m LXM32MD85N4 32 A, 480 V, three phase || 48 N.m LXM32MC10N4 40 A, 400 V, three phase || 48 N.m LXM3
China Rohs Regulation:
X
Feedback Type:
single turn SinCos Hiperface
Holding Torque:
80 N.m holding brake
Speed Feedback Resolution:
131072 points/turn
Pvc Free:
Yes
Shaft Diameter:
38 mm
Key Width:
70 mm
Second Shaft:
without second shaft end
Maximum Axial Force Fa:
0.2 x Fr
Peak Stall Torque:
101 N.m LXM32.D72N4 24 A, 400 V, three phase || 101 N.m LXM32.D72N4 24 A, 480 V, three phase || 115.5 N.m LXM32MD85N4 32 A, 400 V, three phase || 115.5 N.m LXM32MD85N4 32 A, 480 V, three phase || 130.7 N.m LXM32MC10N4 40 A, 400 V, three phase || 130.
Nominal Speed:
2000 rpm LXM32MC10N4 40 A, 400 V, three phase || 2000 rpm LXM32MC10N4 40 A, 480 V, three phase || 2500 rpm LXM32.D72N4 24 A, 400 V, three phase || 2500 rpm LXM32.D72N4 24 A, 480 V, three phase || 2000 rpm LXM32MD85N4 32 A, 400 V, three phase || 2000
Torque Constant:
1.56 N.m/A 120 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Brake Pull-In Power:
40 W
Continuous Power:
6.1 W
Nominal Output Power:
5900 W LXM32.D72N4 24 A, 400 V, three phase || 5900 W LXM32.D72N4 24 A, 480 V, three phase || 6070 W LXM32MD85N4 32 A, 400 V, three phase || 6070 W LXM32MD85N4 32 A, 480 V, three phase || 6070 W LXM32MC10N4 40 A, 400 V, three phase || 6070 W LXM32MC1
Sustainable Offer Status:
Green Premium product
Shaft End:
keyed
Electrical Connection:
rotatable right-angled connectors
Back Emf Constant:
108.3 V/krpm 120 °C
Environmental Disclosure:
ENVPEP111049EN
Range Compatibility:
Lexium 32
Maximum Radial Force Fr:
4200 N 1000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Holding Brake:
with
Phase:
three phase
Mercury Free:
Yes
[Us] Rated Supply Voltage:
480 V
Device Short Name:
BMH
Type Of Cooling:
natural convection
Circle Diameter Of The Mounting Holes:
215 mm
Centring Collar Diameter:
180 mm
Stator Resistance:
0.15 Ohm 20 °C
Centring Collar Depth:
4 mm
Number Of Motor Stacks:
2
Stator Electrical Time Constant:
25.7 ms 20 °C
Maximum Current Irms:
72 A LXM32.D72N4
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Maximum Mechanical Speed:
4000 rpm
Motor Flange Size:
190 mm
Product Or Component Type:
servo motor
Net Weight:
32.5 kg
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rotor Inertia:
144.8 kg.cm²
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
N/A
Mounting Support:
international standard flange
Shaft Length:
80 mm
Rohs Exemption Information:
Yes
Warranty:
18 months
Stator Inductance:
3.86 mH 20 °C
Maximum Permanent Current:
114 A
Nominal Torque:
22.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 22.3 N.m LXM32.D72N4 24 A, 480 V, three phase || 29 N.m LXM32MD85N4 32 A, 400 V, three phase || 29 N.m LXM32MD85N4 32 A, 480 V, three phase || 29 N.m LXM32MC10N4 40 A, 400 V, three phase || 29 N.m LXM3
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
