Schneider Electric BMH2053P36F2A Motor 205Mm Iec 88Nm Ip65/67 9,4Kw Key
SKU:
BMH2053P36F2A
UPC:
3.61E+12
MPN:
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Power:
9.6 W
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Motor Stacks:
3
Torque Constant:
3.5 N.m/A 120 °C
Range Compatibility:
Lexium 32
Brake Pull-In Power:
40 W
Back Emf Constant:
218 V/krpm 120 °C
Sustainable Offer Status:
Green Premium product
Mounting Holes Diameter:
14 mm
Stator Inductance:
6.9 mH 20 °C
Stator Electrical Time Constant:
21.6 ms 20 °C
Maximum Permanent Current:
107.4 A
Centring Collar Diameter:
180 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Speed Feedback Resolution:
32768 points/turn
Mounting Support:
international standard flange
Nominal Torque:
52.2 N.m LXM32.D72N4 24 A, 400 V, three phase || 52.2 N.m LXM32.D72N4 24 A, 480 V, three phase
Centring Collar Depth:
4 mm
China Rohs Regulation:
X
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Mercury Free:
Yes
[Us] Rated Supply Voltage:
480 V
Maximum Mechanical Speed:
3800 rpm
Stator Resistance:
0.32 Ohm 20 °C
Feedback Type:
single turn SinCos Hiperface
Nominal Speed:
1200 rpm LXM32.D72N4 24 A, 400 V, three phase || 1200 rpm LXM32.D72N4 24 A, 480 V, three phase
Maximum Radial Force Fr:
4500 N 1000 rpm || 3570 N 2000 rpm || 3120 N 3000 rpm
Nominal Output Power:
6500 W LXM32.D72N4 24 A, 400 V, three phase || 6500 W LXM32.D72N4 24 A, 480 V, three phase
Environmental Disclosure:
ENVPEP111049EN
Number Of Mounting Holes:
4
Rohs Exemption Information:
Yes
Product Or Component Type:
servo motor
Rotor Inertia:
206 kg.cm²
Second Shaft:
without second shaft end
Electrical Connection:
rotatable right-angled connectors
Key Width:
70 mm
Length:
538.5 mm
Circle Diameter Of The Mounting Holes:
215 mm
Phase:
three phase
Continuous Stall Current:
25.2 A
Holding Torque:
80 N.m holding brake
Maximum Current Irms:
72 A LXM32.D72N4
Holding Brake:
with
Net Weight:
71.9 kg
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Maximum Axial Force Fa:
0.2 x Fr
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft End:
keyed
Circularity Profile:
N/A
Peak Stall Torque:
232 N.m LXM32.D72N4 24 A, 400 V, three phase || 232 N.m LXM32.D72N4 24 A, 480 V, three phase
Motor Flange Size:
205 mm
Shaft Length:
80 mm
Number Of Motor Poles:
10
Pvc Free:
Yes
Continuous Stall Torque:
84 N.m LXM32.D72N4 24 A, 400 V, three phase || 84 N.m LXM32.D72N4 24 A, 480 V, three phase
