Schneider Electric BMI0702P11F Mot 3P 70Mm Ip54 790W Key Enc Sgt 128 Br
SKU:
BMI0702P11F
UPC:
3.60649E+12
MPN:
Condition:
New
Shaft End:
keyed
Second Shaft:
without second shaft end
Circle Diameter Of The Mounting Holes:
75-82 mm
Mounting Support:
international standard flange
Holding Torque:
3 N.m holding brake
Environmental Disclosure:
ENVPEP1312017EN
Length:
306 mm
Centring Collar Diameter:
60 mm
Shaft Length:
23 mm
Number Of Motor Poles:
10
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ip Degree Of Protection:
shaft IP54 || housing IP65
Supply Voltage Limits:
208-480 V
Stator Electrical Time Constant:
2.9 ms 20 °C
Feedback Type:
absolute single turn SinCos Hiperface
Mercury Free:
Yes
Distance Shaft Shoulder-Flange:
2.5 mm
Number Of Mounting Holes:
4
Phase:
three phase
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Output Current 3S Peak:
6 A 400 V 3 s
Shaft Diameter:
11 mm
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Network Frequency Limits:
47.5-63 Hz
Emc Filter:
integrated
Torque Constant:
1.15 N.m/A 20 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Continuous Output Current:
2 A 8 kHz
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Brake Pull-In Power:
5 W
Holding Brake:
with
Centring Collar Depth:
2.5 mm
Back Emf Constant:
77.18 V/krpm 20 °C
Stator Resistance:
8.89 Ohm 20 °C
Device Short Name:
BMI
Mounting Holes Diameter:
5.5 mm
Number Of Motor Stacks:
2
Electrical Connection:
printed circuit board connector
Pvc Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Rotor Inertia:
1.24 kg.cm²
China Rohs Regulation:
X
Key Width:
4 mm
Maximum Axial Force Fa:
0.2 x Fr
Supply Frequency:
50/60 Hz - 5...5 %
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Product Or Component Type:
servo motor with power stage
Circularity Profile:
ENVEOLI1312017EN
Stator Inductance:
25.75 mH 20 °C
Continuous Stall Current:
0.0833333333333333
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Maximum Mechanical Speed:
8000 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Speed Feedback Resolution:
131072 points/turn
Motor Flange Size:
70 mm
Range Compatibility:
Lexium 32i
Rohs Exemption Information:
Yes
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
