Schneider Electric BMI0702P12A Mot 3P 70Mm Ip54 790W Key Enc Mlt 128
SKU:
BMI0702P12A
UPC:
3606485375748
MPN:
Condition:
New
Mounting Support:
international standard flange
Centring Collar Depth:
2.5 mm
Electrical Connection:
printed circuit board connector
Pvc Free:
Yes
Length:
268 mm
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
China Rohs Regulation:
X
Phase:
three phase
Second Shaft:
without second shaft end
Maximum Axial Force Fa:
0.2 x Fr
Maximum Mechanical Speed:
8000 rpm
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Circularity Profile:
ENVEOLI1312017EN
Output Current 3S Peak:
6 A 400 V 3 s
Warranty:
18 months
Mounting Holes Diameter:
5.5 mm
Motor Flange Size:
70 mm
Stator Electrical Time Constant:
2.9 ms 20 °C
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Shaft End:
keyed
Environmental Disclosure:
ENVPEP1312017EN
Mercury Free:
Yes
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Stator Resistance:
8.89 Ohm 20 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Distance Shaft Shoulder-Flange:
2.5 mm
Ip Degree Of Protection:
shaft IP54 || housing IP65
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Range Compatibility:
Lexium 32i
Number Of Motor Stacks:
2
Sustainable Offer Status:
Green Premium product
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Shaft Diameter:
11 mm
Number Of Mounting Holes:
4
Centring Collar Diameter:
60 mm
Number Of Motor Poles:
10
Continuous Output Current:
2 A 8 kHz
Stator Inductance:
25.75 mH 20 °C
Holding Brake:
without
Key Width:
4 mm
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Shaft Length:
23 mm
Product Or Component Type:
servo motor with power stage
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Network Frequency Limits:
47.5-63 Hz
Back Emf Constant:
77.18 V/krpm 20 °C
Circle Diameter Of The Mounting Holes:
75-82 mm
Supply Frequency:
50/60 Hz - 5...5 %
Torque Constant:
1.15 N.m/A 20 °C
Supply Voltage Limits:
208-480 V
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
BMI
Feedback Type:
absolute multiturn SinCos Hiperface
Emc Filter:
integrated
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
