Schneider Electric BMI0702P16F Mot 3P 70Mm Ip54 790W Key Enc Sgt 16 Br
SKU:
BMI0702P16F
UPC:
3606485375779
MPN:
Condition:
New
Shaft Length:
23 mm
Feedback Type:
absolute single turn SinCos Hiperface
Distance Shaft Shoulder-Flange:
2.5 mm
Product Or Component Type:
servo motor with power stage
Stator Inductance:
25.75 mH 20 °C
Number Of Motor Poles:
10
Number Of Motor Stacks:
2
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Maximum Axial Force Fa:
0.2 x Fr
Warranty:
18 months
Length:
306 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Network Frequency Limits:
47.5-63 Hz
Centring Collar Diameter:
60 mm
Supply Frequency:
50/60 Hz - 5...5 %
Shaft End:
keyed
Number Of Mounting Holes:
4
Torque Constant:
1.15 N.m/A 20 °C
Environmental Disclosure:
ENVPEP1312017EN
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Second Shaft:
without second shaft end
Speed Feedback Resolution:
32768 points/turn
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Mechanical Speed:
8000 rpm
Continuous Stall Current:
0.0833333333333333
Circle Diameter Of The Mounting Holes:
75-82 mm
Shaft Diameter:
11 mm
China Rohs Regulation:
X
Range Compatibility:
Lexium 32i
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Device Short Name:
BMI
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Phase:
three phase
Continuous Output Current:
2 A 8 kHz
Centring Collar Depth:
2.5 mm
Mercury Free:
Yes
Motor Flange Size:
70 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Brake Pull-In Power:
5 W
Stator Resistance:
8.89 Ohm 20 °C
Circularity Profile:
ENVEOLI1312017EN
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Mounting Support:
international standard flange
Emc Filter:
integrated
Type Of Cooling:
natural convection
Holding Torque:
3 N.m holding brake
Rohs Exemption Information:
Yes
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Mounting Holes Diameter:
5.5 mm
Supply Voltage Limits:
208-480 V
Key Width:
4 mm
Ip Degree Of Protection:
shaft IP54 || housing IP65
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Stator Electrical Time Constant:
2.9 ms 20 °C
Holding Brake:
with
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Rotor Inertia:
1.24 kg.cm²
Output Current 3S Peak:
6 A 400 V 3 s
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
This product is part of the Lexium 32i range, an offer of servo motors for integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with a maximum...
