Schneider Electric BMI0702P31A Mot 3P 70Mm Ip65 790W Key Enc Sgt 128
SKU:
BMI0702P31A
UPC:
3606485375885
MPN:
Condition:
New
Stator Resistance:
8.89 Ohm 20 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
three phase
Electrical Connection:
printed circuit board connector
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Length:
268 mm
Ip Degree Of Protection:
IP65
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Back Emf Constant:
77.18 V/krpm 20 °C
China Rohs Regulation:
X
Centring Collar Depth:
2.5 mm
Mounting Support:
international standard flange
Emc Filter:
integrated
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Diameter:
60 mm
Holding Brake:
without
Stator Inductance:
25.75 mH 20 °C
Supply Frequency:
50/60 Hz - 5...5 %
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Sustainable Offer Status:
Green Premium product
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Distance Shaft Shoulder-Flange:
2.5 mm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Maximum Axial Force Fa:
0.2 x Fr
Device Short Name:
BMI
Speed Feedback Resolution:
131072 points/turn
Shaft Length:
23 mm
Maximum Mechanical Speed:
8000 rpm
Key Width:
4 mm
Stator Electrical Time Constant:
2.9 ms 20 °C
Circularity Profile:
ENVEOLI1312017EN
Second Shaft:
without second shaft end
Warranty:
18 months
Feedback Type:
absolute single turn SinCos Hiperface
Rohs Exemption Information:
Yes
Circle Diameter Of The Mounting Holes:
75-82 mm
Output Current 3S Peak:
6 A 400 V 3 s
Shaft End:
keyed
Type Of Cooling:
natural convection
Number Of Mounting Holes:
4
Pvc Free:
Yes
Torque Constant:
1.15 N.m/A 20 °C
Number Of Motor Poles:
10
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure:
ENVPEP1312017EN
Supply Voltage Limits:
208-480 V
Network Frequency Limits:
47.5-63 Hz
Rotor Inertia:
1.13 kg.cm²
Mounting Holes Diameter:
5.5 mm
Number Of Motor Stacks:
2
Range Compatibility:
Lexium 32i
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
