Schneider Electric BMI0702T17A Mot 1P 70Mm Ip54 640W Key Enc Mlt 16
SKU:
BMI0702T17A
UPC:
3606485376103
MPN:
Condition:
New
Distance Shaft Shoulder-Flange:
2.5 mm
Centring Collar Diameter:
60 mm
Network Frequency Limits:
47.5-63 Hz
Range Compatibility:
Lexium 32i
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP1312017EN
Peak Stall Torque:
6.6 N.m 115 V single phase || 6.6 N.m 230 V single phase
Feedback Type:
absolute multiturn SinCos Hiperface
Supply Voltage Limits:
100-240 V
Stator Electrical Time Constant:
2.89 ms 20 °C
Mercury Free:
Yes
Output Current 3S Peak:
10.5 A 230 V 1 s
Continuous Stall Torque:
2.48 N.m 115...230 V single phase
Motor Flange Size:
70 mm
Electrical Connection:
printed circuit board connector
Back Emf Constant:
42.1 V/krpm 20 °C
Sustainable Offer Status:
Green Premium product
Continuous Output Current:
2.6 A 8 kHz
Continuous Stall Current:
2.6 A
Pvc Free:
Yes
Emc Filter:
integrated
Mounting Holes Diameter:
5.5 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft End:
keyed
Holding Brake:
without
Number Of Mounting Holes:
4
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Centring Collar Depth:
2.5 mm
Second Shaft:
without second shaft end
China Rohs Regulation:
X
Nominal Speed:
4000 rpm 230 V single phase || 1700 rpm 115 V single phase
Maximum Current Irms:
17.7 A 230 V, single phase || 17.7 A 115 V, single phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Mechanical Speed:
8000 rpm
Key Width:
4 mm
Circularity Profile:
ENVEOLI1312017EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Inductance:
7.8 mH 20 °C
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Nominal Torque:
2.2 N.m 115 V single phase || 1.7 N.m 230 V single phase
Number Of Motor Stacks:
2
Supply Frequency:
50/60 Hz - 5...5 %
Mounting Support:
international standard flange
Rotor Inertia:
1.13 kg.cm²
Length:
268 mm
Phase:
single phase
Circle Diameter Of The Mounting Holes:
75-82 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Number Of Motor Poles:
10
Warranty:
18 months
Torque Constant:
0.63 N.m/A 20 °C
Type Of Cooling:
natural convection
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Shaft Length:
23 mm
Product Or Component Type:
servo motor with power stage
Ip Degree Of Protection:
shaft IP54 || housing IP65
Shaft Diameter:
11 mm
Stator Resistance:
2.7 Ohm 20 °C
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
