Schneider Electric BMI0703P37F Mot 3P 70Mm Ip65 860W Key Enc Mlt 16 Br
SKU:
BMI0703P37F
UPC:
3606485376592
MPN:
Condition:
New
Number Of Motor Poles:
10
Rotor Inertia:
1.78 kg.cm²
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Holding Brake:
with
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Emc Filter:
integrated
Maximum Mechanical Speed:
8000 rpm
Continuous Stall Current:
0.0833333333333333
Motor Flange Size:
70 mm
Key Width:
5 mm
Nominal Torque:
2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase
Circle Diameter Of The Mounting Holes:
75-82 mm
Range Compatibility:
Lexium 32i
Supply Voltage Limits:
208-480 V
Circularity Profile:
ENVEOLI1312017EN
Torque Constant:
1.41 N.m/A 20 °C
Product Or Component Type:
servo motor with power stage
Shaft End:
keyed
Feedback Type:
absolute multiturn SinCos Hiperface
Environmental Disclosure:
ENVPEP1312017EN
Centring Collar Depth:
2.5 mm
Nominal Output Power:
900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase
Type Of Cooling:
natural convection
Second Shaft:
without second shaft end
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Axial Force Fa:
0.2 x Fr
Number Of Motor Stacks:
3
Sustainable Offer Status:
Green Premium product
Distance Shaft Shoulder-Flange:
2.5 mm
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Mercury Free:
Yes
Electrical Connection:
printed circuit board connector
Network Frequency Limits:
47.5-63 Hz
Continuous Stall Torque:
3.4 N.m 208...480 V three phase
Rohs Exemption Information:
Yes
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Continuous Output Current:
2 A 8 kHz
Brake Pull-In Power:
5 W
Output Current 3S Peak:
6 A 400 V 3 s
Peak Stall Torque:
8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase
Nominal Speed:
3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase
Phase:
three phase
Mounting Support:
international standard flange
Holding Torque:
3 N.m holding brake
Number Of Mounting Holes:
4
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Stator Resistance:
7.99 Ohm 20 °C
Ip Degree Of Protection:
IP65
China Rohs Regulation:
X
Supply Frequency:
50/60 Hz - 5...5 %
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pvc Free:
Yes
Centring Collar Diameter:
60 mm
Warranty:
18 months
Stator Electrical Time Constant:
3.2 ms 20 °C
Shaft Diameter:
14 mm
Maximum Current Irms:
12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase
Device Short Name:
BMI
Stator Inductance:
25.6 mH 20 °C
Back Emf Constant:
95.39 V/krpm 20 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
