Schneider Electric BMI0703T06A Mot 1P 70Mm Ip54 640W Nky Enc Sgt 16
SKU:
BMI0703T06A
UPC:
3.60649E+12
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
X
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Resistance:
2.58 Ohm 20 °C
Maximum Current Irms:
17.8 A 115 V, single phase || 17.8 A 230 V, single phase
Ip Degree Of Protection:
shaft IP54 || housing IP65
Feedback Type:
absolute single turn SinCos Hiperface
Environmental Disclosure:
ENVPEP1312017EN
Mercury Free:
Yes
Length:
300 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Phase:
single phase
Supply Frequency:
50/60 Hz - 5...5 %
Number Of Motor Stacks:
3
Range Compatibility:
Lexium 32i
Continuous Stall Torque:
3.4 N.m 115...230 V single phase
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
Maximum Axial Force Fa:
0.2 x Fr
Holding Brake:
without
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Number Of Mounting Holes:
4
Rotor Inertia:
1.67 kg.cm²
Rohs Exemption Information:
Yes
Mounting Support:
international standard flange
Network Frequency Limits:
47.5-63 Hz
Emc Filter:
integrated
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Continuous Output Current:
3.5 A 8 kHz
Centring Collar Diameter:
60 mm
Supply Voltage Limits:
100-240 V
Circularity Profile:
ENVEOLI1312017EN
Device Short Name:
BMI
Back Emf Constant:
54.44 V/krpm 20 °C
Output Current 3S Peak:
10.5 A 230 V 3 s
Number Of Motor Poles:
10
Shaft Diameter:
14 mm
Stator Inductance:
2.28 mH 20 °C
Shaft End:
untapped
Peak Stall Torque:
8.6 N.m 115 V single phase || 8.6 N.m 230 V single phase
Electrical Connection:
printed circuit board connector
Maximum Mechanical Speed:
8000 rpm
Distance Shaft Shoulder-Flange:
2.5 mm
Speed Feedback Resolution:
32768 points/turn
Pvc Free:
Yes
Nominal Torque:
2.9 N.m 115 V single phase || 2.2 N.m 230 V single phase
Circle Diameter Of The Mounting Holes:
75-82 mm
Sustainable Offer Status:
Green Premium product
Nominal Speed:
3200 rpm 230 V single phase || 1400 rpm 115 V single phase
Centring Collar Depth:
2.5 mm
Continuous Stall Current:
3.5 A
Second Shaft:
without second shaft end
Stator Electrical Time Constant:
0.88 ms 20 °C
Shaft Length:
30 mm
Motor Flange Size:
70 mm
Torque Constant:
0.81 N.m/A 20 °C
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
