Schneider Electric BMI0703T26A Mot 1P 70Mm Ip65 640W Nky Enc Sgt 16
SKU:
BMI0703T26A
UPC:
3.60649E+12
MPN:
Condition:
New
Number Of Mounting Holes:
4
Range Compatibility:
Lexium 32i
Ip Degree Of Protection:
IP65
Circularity Profile:
ENVEOLI1312017EN
Maximum Current Irms:
17.8 A 115 V, single phase || 17.8 A 230 V, single phase
China Rohs Regulation:
X
Number Of Motor Stacks:
3
Stator Resistance:
2.58 Ohm 20 °C
Shaft Diameter:
14 mm
Feedback Type:
absolute single turn SinCos Hiperface
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Stall Current:
3.5 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Speed:
3200 rpm 230 V single phase || 1400 rpm 115 V single phase
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Phase:
single phase
Stator Inductance:
2.28 mH 20 °C
Supply Frequency:
50/60 Hz - 5...5 %
Motor Flange Size:
70 mm
Circle Diameter Of The Mounting Holes:
75-82 mm
Stator Electrical Time Constant:
0.88 ms 20 °C
Continuous Stall Torque:
3.4 N.m 115...230 V single phase
Maximum Axial Force Fa:
0.2 x Fr
Network Frequency Limits:
47.5-63 Hz
Shaft End:
untapped
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Pvc Free:
Yes
Holding Brake:
without
Product Or Component Type:
servo motor with power stage
Continuous Output Current:
3.5 A 8 kHz
Output Current 3S Peak:
10.5 A 230 V 3 s
Centring Collar Diameter:
60 mm
Sustainable Offer Status:
Green Premium product
Mounting Support:
international standard flange
Peak Stall Torque:
8.6 N.m 115 V single phase || 8.6 N.m 230 V single phase
Number Of Motor Poles:
10
Torque Constant:
0.81 N.m/A 20 °C
Shaft Length:
30 mm
Back Emf Constant:
54.44 V/krpm 20 °C
Rohs Exemption Information:
Yes
Emc Filter:
integrated
Second Shaft:
without second shaft end
Mounting Holes Diameter:
5.5 mm
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Distance Shaft Shoulder-Flange:
2.5 mm
Device Short Name:
BMI
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
Type Of Cooling:
natural convection
Speed Feedback Resolution:
32768 points/turn
Length:
300 mm
Maximum Mechanical Speed:
8000 rpm
Nominal Torque:
2.9 N.m 115 V single phase || 2.2 N.m 230 V single phase
