Schneider Electric BMI0703T31F Mot 1P 70Mm Ip65 640W Key Enc Sgt 128 Br
SKU:
BMI0703T31F
UPC:
3.60649E+12
MPN:
Condition:
New
Mercury Free:
Yes
Ip Degree Of Protection:
IP65
Brake Pull-In Power:
5 W
Shaft Diameter:
14 mm
Number Of Mounting Holes:
4
Speed Feedback Resolution:
131072 points/turn
Supply Frequency:
50/60 Hz - 5...5 %
Number Of Motor Poles:
10
Stator Electrical Time Constant:
0.88 ms 20 °C
Motor Flange Size:
70 mm
Phase:
single phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Mechanical Speed:
8000 rpm
Nominal Speed:
3200 rpm 230 V single phase || 1400 rpm 115 V single phase
Network Frequency Limits:
47.5-63 Hz
Warranty:
18 months
Type Of Cooling:
natural convection
Distance Shaft Shoulder-Flange:
2.5 mm
Length:
339 mm
Key Width:
5 mm
Second Shaft:
without second shaft end
Centring Collar Depth:
2.5 mm
Back Emf Constant:
54.44 V/krpm 20 °C
Holding Torque:
3 N.m holding brake
Range Compatibility:
Lexium 32i
Mounting Holes Diameter:
5.5 mm
China Rohs Regulation:
X
Environmental Disclosure:
ENVPEP1312017EN
Supply Voltage Limits:
100-240 V
Stator Resistance:
2.58 Ohm 20 °C
Continuous Stall Current:
3.5 A
Electrical Connection:
printed circuit board connector
Stator Inductance:
2.28 mH 20 °C
Pvc Free:
Yes
Device Short Name:
BMI
Mounting Support:
international standard flange
Sustainable Offer Status:
Green Premium product
Peak Stall Torque:
8.6 N.m 115 V single phase || 8.6 N.m 230 V single phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
Rotor Inertia:
1.78 kg.cm²
Holding Brake:
with
Emc Filter:
integrated
Centring Collar Diameter:
60 mm
Number Of Motor Stacks:
3
Product Or Component Type:
servo motor with power stage
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Output Current:
3.5 A 8 kHz
Circularity Profile:
ENVEOLI1312017EN
Output Current 3S Peak:
10.5 A 230 V 3 s
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Maximum Current Irms:
17.8 A 115 V, single phase || 17.8 A 230 V, single phase
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Feedback Type:
absolute single turn SinCos Hiperface
Torque Constant:
0.81 N.m/A 20 °C
Shaft Length:
30 mm
Continuous Stall Torque:
3.4 N.m 115...230 V single phase
Shaft End:
keyed
Circle Diameter Of The Mounting Holes:
75-82 mm
Maximum Axial Force Fa:
0.2 x Fr
Nominal Torque:
2.9 N.m 115 V single phase || 2.2 N.m 230 V single phase
