Schneider Electric BMI1002P21A Mot 3P 100Mm Ip65 1,9Kw Nky Enc Sgt 128
SKU:
BMI1002P21A
UPC:
3606485377087
MPN:
Condition:
New
Warranty:
18 months
Number Of Motor Stacks:
2
Mounting Holes Diameter:
9 mm
Rotor Inertia:
6.28 kg.cm²
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Maximum Current Irms:
17.5 A 208 V, three phase || 17.5 A 400 V, three phase || 17.5 A 480 V, three phase
Pvc Free:
Yes
Stator Inductance:
9.79 mH 20 °C
Nominal Speed:
1900 rpm 208 V three phase || 3800 rpm 400 V three phase || 4700 rpm 480 V three phase
Nominal Torque:
5.1 N.m 400 V three phase || 5.4 N.m 208 V three phase || 4.1 N.m 480 V three phase
Length:
273 mm
Nominal Output Power:
1000 W 208 V three phase || 1900 W 400 V three phase || 1900 W 480 V three phase
Output Current 3S Peak:
12 A 400 V 3 s
Supply Voltage Limits:
208-480 V
China Rohs Regulation:
X
Mounting Support:
international standard flange
Continuous Stall Current:
0.166666666666667
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor with power stage
Centring Collar Depth:
3.5 mm
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1312017EN
Device Short Name:
BMI
Stator Resistance:
2.347 Ohm 20 °C
Sustainable Offer Status:
Green Premium product
Back Emf Constant:
84.52 V/krpm 20 °C
Circle Diameter Of The Mounting Holes:
115-115 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Second Shaft:
without second shaft end
Maximum Axial Force Fa:
0.2 x Fr
Distance Shaft Shoulder-Flange:
3.5 mm
Shaft Length:
40 mm
Supply Frequency:
50/60 Hz - 5...5 %
Number Of Motor Poles:
10
Type Of Cooling:
natural convection
Feedback Type:
absolute single turn SinCos Hiperface
Network Frequency Limits:
47.5-63 Hz
Stator Electrical Time Constant:
4.17 ms 20 °C
Holding Brake:
without
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft End:
untapped
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Motor Flange Size:
100 mm
Number Of Mounting Holes:
4
Shaft Diameter:
19 mm
Electrical Connection:
printed circuit board connector
Peak Stall Torque:
14 N.m 208 V three phase || 14 N.m 400 V three phase || 14 N.m 480 V three phase
Maximum Mechanical Speed:
6000 rpm
Ip Degree Of Protection:
IP65
Circularity Profile:
ENVEOLI1312017EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Torque Constant:
1.28 N.m/A 20 °C
Phase:
three phase
Emc Filter:
integrated
Continuous Output Current:
4 A 8 kHz
Range Compatibility:
Lexium 32i
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
