Schneider Electric BMI1002P27F Mot 3P 100Mm Ip65 1,9Kw Nky Enc Mlt 16
SKU:
BMI1002P27F
UPC:
3.60649E+12
MPN:
Condition:
New
Feedback Type:
absolute multiturn SinCos Hiperface
Brake Pull-In Power:
8 W
Stator Inductance:
9.79 mH 20 °C
Back Emf Constant:
84.52 V/krpm 20 °C
Product Or Component Type:
servo motor with power stage
Continuous Stall Torque:
6 N.m 208...480 V three phase
Circle Diameter Of The Mounting Holes:
115-115 mm
Number Of Mounting Holes:
4
Length:
282 mm
Stator Electrical Time Constant:
4.17 ms 20 °C
Supply Frequency:
50/60 Hz - 5...5 %
Holding Brake:
with
Maximum Mechanical Speed:
6000 rpm
Nominal Torque:
5.1 N.m 400 V three phase || 5.4 N.m 208 V three phase || 4.1 N.m 480 V three phase
Emc Filter:
integrated
Electrical Connection:
printed circuit board connector
Warranty:
18 months
Centring Collar Diameter:
95 mm
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Second Shaft:
without second shaft end
Motor Flange Size:
100 mm
Device Short Name:
BMI
Centring Collar Depth:
3.5 mm
Shaft Diameter:
19 mm
Number Of Motor Poles:
10
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Distance Shaft Shoulder-Flange:
3.5 mm
Mercury Free:
Yes
China Rohs Regulation:
X
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Stator Resistance:
2.347 Ohm 20 °C
Type Of Cooling:
natural convection
Pvc Free:
Yes
Supply Voltage Limits:
208-480 V
Torque Constant:
1.28 N.m/A 20 °C
Network Frequency Limits:
47.5-63 Hz
Nominal Output Power:
1000 W 208 V three phase || 1900 W 400 V three phase || 1900 W 480 V three phase
Phase:
three phase
Mounting Support:
international standard flange
Range Compatibility:
Lexium 32i
Environmental Disclosure:
ENVPEP1312017EN
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Peak Stall Torque:
14 N.m 208 V three phase || 14 N.m 400 V three phase || 14 N.m 480 V three phase
Continuous Stall Current:
0.166666666666667
Continuous Output Current:
4 A 8 kHz
Holding Torque:
5.5 N.m holding brake
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Axial Force Fa:
0.2 x Fr
Number Of Motor Stacks:
2
Mounting Holes Diameter:
9 mm
Rotor Inertia:
6.77 kg.cm²
Sustainable Offer Status:
Green Premium product
Nominal Speed:
1900 rpm 208 V three phase || 3800 rpm 400 V three phase || 4700 rpm 480 V three phase
Rohs Exemption Information:
Yes
Maximum Current Irms:
17.5 A 208 V, three phase || 17.5 A 400 V, three phase || 17.5 A 480 V, three phase
