Schneider Electric BMI1002T07A Mot 1P 100Mm Ip54 1,3Kw Nky Enc Mlt 16
Schneider Electric
$2,986.48
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric BMI1002T07A Mot 1P 100Mm Ip54 1,3Kw Nky Enc Mlt 16
servo motor BMI 1-phase - untapped IP54 multiturn - 32768 p/t x 4096 t
- Rotor Inertia:
- 6.28 kg.cm²
- Number Of Motor Stacks:
- 2
- Network Frequency Limits:
- 47.5-63 Hz
- Sustainable Offer Status:
- Green Premium product
- Holding Brake:
- without
- Maximum Radial Force Fr:
- 990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
- Nominal Output Power:
- 750 W 115 V single phase || 1300 W 230 V single phase
- Mounting Holes Diameter:
- 9 mm
- Length:
- 273 mm
- Second Shaft:
- without second shaft end
- Rohs Exemption Information:
- Yes
- Peak Stall Torque:
- 14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
- Continuous Stall Current:
- 0.25
- Nominal Speed:
- 1400 rpm 115 V single phase || 3000 rpm 230 V single phase
- Shaft End:
- untapped
- Distance Shaft Shoulder-Flange:
- 3.5 mm
- Device Short Name:
- BMI
- Circle Diameter Of The Mounting Holes:
- 115-115 mm
- Type Of Cooling:
- natural convection
- Range Compatibility:
- Lexium 32i
- Circularity Profile:
- ENVEOLI1312017EN
- Ip Degree Of Protection:
- shaft IP54 || housing IP65
- Centring Collar Diameter:
- 95 mm
- Feedback Type:
- absolute multiturn SinCos Hiperface
- Mounting Support:
- international standard flange
- [Us] Rated Supply Voltage:
- 115...230 V - 15...10 %
- Electrical Connection:
- printed circuit board connector
- Motor Flange Size:
- 100 mm
- Emc Filter:
- integrated
- Number Of Motor Poles:
- 10
- Stator Resistance:
- 1.08 Ohm 20 °C
- Maximum Current Irms:
- 30 A 115 V, single phase || 30 A 230 V, single phase
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Product Or Component Type:
- servo motor with power stage
- Continuous Output Current:
- 6 A 8 kHz
- Stator Electrical Time Constant:
- 4.35 ms 20 °C
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Supply Frequency:
- 50/60 Hz - 5...5 %
- Back Emf Constant:
- 58.5 V/krpm 20 °C
- Nominal Torque:
- 5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
- Product Compatibility:
- drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
- Stator Inductance:
- 4.7 mH 20 °C
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Warranty:
- 18 months
- Shaft Diameter:
- 19 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Centring Collar Depth:
- 3.5 mm
- China Rohs Regulation:
- X
- Continuous Stall Torque:
- 6 N.m 115...230 V single phase
- Supply Voltage Limits:
- 100-240 V
- Environmental Disclosure:
- ENVPEP1312017EN
- Maximum Mechanical Speed:
- 6000 rpm
- Number Of Mounting Holes:
- 4
- Pvc Free:
- Yes
- Torque Constant:
- 0.89 N.m/A 20 °C
- Speed Feedback Resolution:
- 32768 points/turn x 4096 turns
- Maximum Axial Force Fa:
- 0.2 x Fr
- Shaft Length:
- 40 mm
- Output Current 3S Peak:
- 18 A 230 V 3 s
- Mercury Free:
- Yes
- Phase:
- single phase
- Datasheet:
- View
