Schneider Electric BMI1002T12F Mot 1P 100Mm Ip54 1,3Kw Key Enc Mlt 128
SKU:
BMI1002T12F
UPC:
3606485377353
MPN:
Condition:
New
Length:
282 mm
Stator Resistance:
1.08 Ohm 20 °C
Holding Brake:
with
Rohs Exemption Information:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury Free:
Yes
Peak Stall Torque:
14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
Number Of Motor Poles:
10
Key Width:
6 mm
Continuous Stall Current:
0.25
Mounting Support:
international standard flange
Stator Electrical Time Constant:
4.35 ms 20 °C
Product Or Component Type:
servo motor with power stage
Range Compatibility:
Lexium 32i
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Output Current 3S Peak:
18 A 230 V 3 s
Type Of Cooling:
natural convection
Sustainable Offer Status:
Green Premium product
Number Of Motor Stacks:
2
Nominal Speed:
1400 rpm 115 V single phase || 3000 rpm 230 V single phase
Shaft End:
keyed
Network Frequency Limits:
47.5-63 Hz
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Shaft Diameter:
19 mm
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Continuous Output Current:
6 A 8 kHz
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Emc Filter:
integrated
Supply Frequency:
50/60 Hz - 5...5 %
Centring Collar Depth:
3.5 mm
Phase:
single phase
Maximum Mechanical Speed:
6000 rpm
China Rohs Regulation:
X
Ip Degree Of Protection:
shaft IP54 || housing IP65
Shaft Length:
40 mm
Rotor Inertia:
6.77 kg.cm²
Circularity Profile:
ENVEOLI1312017EN
Circle Diameter Of The Mounting Holes:
115-115 mm
Feedback Type:
absolute multiturn SinCos Hiperface
Stator Inductance:
4.7 mH 20 °C
Pvc Free:
Yes
Holding Torque:
5.5 N.m holding brake
Supply Voltage Limits:
100-240 V
Maximum Current Irms:
30 A 115 V, single phase || 30 A 230 V, single phase
Second Shaft:
without second shaft end
Centring Collar Diameter:
95 mm
Continuous Stall Torque:
6 N.m 115...230 V single phase
Nominal Torque:
5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
Nominal Output Power:
750 W 115 V single phase || 1300 W 230 V single phase
Mounting Holes Diameter:
9 mm
Motor Flange Size:
100 mm
Torque Constant:
0.89 N.m/A 20 °C
Electrical Connection:
printed circuit board connector
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Device Short Name:
BMI
Environmental Disclosure:
ENVPEP1312017EN
Back Emf Constant:
58.5 V/krpm 20 °C
Brake Pull-In Power:
8 W
Distance Shaft Shoulder-Flange:
3.5 mm
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
0.2 x Fr
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 6000RPM...