Schneider Electric BMI1002T16F Mot 1P 100Mm Ip54 1,3Kw Key Enc Sgt 16
SKU:
BMI1002T16F
UPC:
3606485377377
MPN:
Condition:
New
Circle Diameter Of The Mounting Holes:
115-115 mm
Brake Pull-In Power:
8 W
Supply Frequency:
50/60 Hz - 5...5 %
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Shaft End:
keyed
Device Short Name:
BMI
Centring Collar Diameter:
95 mm
Range Compatibility:
Lexium 32i
Rotor Inertia:
6.77 kg.cm²
Product Or Component Type:
servo motor with power stage
Ip Degree Of Protection:
shaft IP54 || housing IP65
Feedback Type:
absolute single turn SinCos Hiperface
Phase:
single phase
Stator Inductance:
4.7 mH 20 °C
Environmental Disclosure:
ENVPEP1312017EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Axial Force Fa:
0.2 x Fr
Warranty:
18 months
Torque Constant:
0.89 N.m/A 20 °C
Shaft Length:
40 mm
Holding Torque:
5.5 N.m holding brake
Pvc Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Stall Current:
0.25
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Motor Flange Size:
100 mm
Nominal Speed:
1400 rpm 115 V single phase || 3000 rpm 230 V single phase
Supply Voltage Limits:
100-240 V
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Network Frequency Limits:
47.5-63 Hz
Peak Stall Torque:
14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
Stator Resistance:
1.08 Ohm 20 °C
Length:
282 mm
Number Of Motor Poles:
10
Continuous Output Current:
6 A 8 kHz
China Rohs Regulation:
X
Back Emf Constant:
58.5 V/krpm 20 °C
Stator Electrical Time Constant:
4.35 ms 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Key Width:
6 mm
Electrical Connection:
printed circuit board connector
Mounting Support:
international standard flange
Centring Collar Depth:
3.5 mm
Sustainable Offer Status:
Green Premium product
Distance Shaft Shoulder-Flange:
3.5 mm
Nominal Torque:
5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
Mounting Holes Diameter:
9 mm
Rohs Exemption Information:
Yes
Type Of Cooling:
natural convection
Second Shaft:
without second shaft end
Speed Feedback Resolution:
32768 points/turn
Holding Brake:
with
Maximum Mechanical Speed:
6000 rpm
Continuous Stall Torque:
6 N.m 115...230 V single phase
Number Of Motor Stacks:
2
Maximum Current Irms:
30 A 115 V, single phase || 30 A 230 V, single phase
Mercury Free:
Yes
Output Current 3S Peak:
18 A 230 V 3 s
Shaft Diameter:
19 mm
Emc Filter:
integrated
Circularity Profile:
ENVEOLI1312017EN
Nominal Output Power:
750 W 115 V single phase || 1300 W 230 V single phase
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
