Schneider Electric BMI1002T22F Mot 1P 100Mm Ip65 1,3Kw Nky Enc Mlt 128
SKU:
BMI1002T22F
UPC:
3606485377438
MPN:
Condition:
New
Stator Resistance:
1.08 Ohm 20 °C
Ip Degree Of Protection:
IP65
Nominal Torque:
5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Distance Shaft Shoulder-Flange:
3.5 mm
Circle Diameter Of The Mounting Holes:
115-115 mm
Peak Stall Torque:
14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
Stator Inductance:
4.7 mH 20 °C
Shaft End:
untapped
Shaft Length:
40 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Second Shaft:
without second shaft end
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Support:
international standard flange
Number Of Mounting Holes:
4
Centring Collar Diameter:
95 mm
Holding Torque:
5.5 N.m holding brake
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
X
Nominal Speed:
1400 rpm 115 V single phase || 3000 rpm 230 V single phase
Centring Collar Depth:
3.5 mm
Nominal Output Power:
750 W 115 V single phase || 1300 W 230 V single phase
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Supply Frequency:
50/60 Hz - 5...5 %
Feedback Type:
absolute multiturn SinCos Hiperface
Shaft Diameter:
19 mm
Circularity Profile:
ENVEOLI1312017EN
Device Short Name:
BMI
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Supply Voltage Limits:
100-240 V
Motor Flange Size:
100 mm
Emc Filter:
integrated
Brake Pull-In Power:
8 W
Holding Brake:
with
Rohs Exemption Information:
Yes
Maximum Mechanical Speed:
6000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Torque Constant:
0.89 N.m/A 20 °C
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Mounting Holes Diameter:
9 mm
Length:
282 mm
Mercury Free:
Yes
Stator Electrical Time Constant:
4.35 ms 20 °C
Continuous Stall Torque:
6 N.m 115...230 V single phase
Continuous Stall Current:
0.25
Back Emf Constant:
58.5 V/krpm 20 °C
Network Frequency Limits:
47.5-63 Hz
Rotor Inertia:
6.77 kg.cm²
Environmental Disclosure:
ENVPEP1312017EN
Phase:
single phase
Warranty:
18 months
Product Or Component Type:
servo motor with power stage
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Number Of Motor Poles:
10
Output Current 3S Peak:
18 A 230 V 3 s
Range Compatibility:
Lexium 32i
Maximum Current Irms:
30 A 115 V, single phase || 30 A 230 V, single phase
