Schneider Electric BMI1002T26A Mot 1P 100Mm Ip65 1,3Kw Nky Enc Sgt 16
SKU:
BMI1002T26A
UPC:
3606485377445
MPN:
Condition:
New
Ip Degree Of Protection:
IP65
Stator Electrical Time Constant:
4.35 ms 20 °C
Continuous Stall Current:
0.25
Stator Inductance:
4.7 mH 20 °C
Output Current 3S Peak:
18 A 230 V 3 s
Supply Frequency:
50/60 Hz - 5...5 %
Holding Brake:
without
Device Short Name:
BMI
Shaft Length:
40 mm
China Rohs Regulation:
X
Product Or Component Type:
servo motor with power stage
Emc Filter:
integrated
Second Shaft:
without second shaft end
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Back Emf Constant:
58.5 V/krpm 20 °C
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Warranty:
18 months
Number Of Motor Poles:
10
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI1312017EN
Rohs Exemption Information:
Yes
Number Of Motor Stacks:
2
Pvc Free:
Yes
Length:
273 mm
Maximum Current Irms:
30 A 115 V, single phase || 30 A 230 V, single phase
Type Of Cooling:
natural convection
Nominal Output Power:
750 W 115 V single phase || 1300 W 230 V single phase
Continuous Stall Torque:
6 N.m 115...230 V single phase
Speed Feedback Resolution:
32768 points/turn
Phase:
single phase
Rotor Inertia:
6.28 kg.cm²
Continuous Output Current:
6 A 8 kHz
Supply Voltage Limits:
100-240 V
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Mechanical Speed:
6000 rpm
Circle Diameter Of The Mounting Holes:
115-115 mm
Peak Stall Torque:
14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
Mounting Support:
international standard flange
Nominal Speed:
1400 rpm 115 V single phase || 3000 rpm 230 V single phase
Shaft Diameter:
19 mm
Number Of Mounting Holes:
4
Stator Resistance:
1.08 Ohm 20 °C
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Maximum Axial Force Fa:
0.2 x Fr
Mercury Free:
Yes
Torque Constant:
0.89 N.m/A 20 °C
Network Frequency Limits:
47.5-63 Hz
Centring Collar Diameter:
95 mm
Motor Flange Size:
100 mm
Centring Collar Depth:
3.5 mm
Distance Shaft Shoulder-Flange:
3.5 mm
Shaft End:
untapped
Nominal Torque:
5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
Range Compatibility:
Lexium 32i
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
