Schneider Electric BSH0401P36A2A Motor 40Mm Iec 0,18Nm 170W Ip65 Key Shaf
SKU:
BSH0401P36A2A
UPC:
3606485467115
MPN:
Condition:
New
Mounting Support:
international standard flange
Mounting Holes Diameter:
4.5 mm
Torque Constant:
0.19 N.m/A 120 °C
Stator Inductance:
14.6 mH 20 °C
Maximum Mechanical Speed:
10000 rpm
Nominal Torque:
0.176 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.176 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.184 N.m LXM32.U45M2 1.5 A, 230 V, single phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Second Shaft:
without second shaft end
Type Of Cooling:
natural convection
[Us] Rated Supply Voltage:
400 V
Maximum Permanent Current:
1.12 A
Stator Resistance:
17.2 Ohm 20 °C
Rohs Exemption Information:
Yes
Device Short Name:
BSH
Peak Stall Torque:
0.8 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.8 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.8 N.m LXM32.U45M2 1.5 A, 230 V, single phase
Number Of Motor Stacks:
1
Stator Electrical Time Constant:
0.85 ms 20 °C
Net Weight:
0.4 kg
Shaft Length:
25 mm
Phase:
three phase
Ip Degree Of Protection:
IP65 standard
Product Or Component Type:
servo motor
Range Compatibility:
Lexium 32
Centring Collar Diameter:
30 mm
Holding Brake:
without
Mercury Free:
Yes
Back Emf Constant:
13.6 V/krpm 20 °C
Circle Diameter Of The Mounting Holes:
46 mm
Centring Collar Depth:
2.5 mm
Speed Feedback Resolution:
32768 points/turn
Shaft End:
keyed
Nominal Output Power:
166 W LXM32.U60N4 1.5 A, 480 V, three phase || 166 W LXM32.U60N4 1.5 A, 400 V, three phase || 77 W LXM32.U45M2 1.5 A, 230 V, single phase
Shaft Diameter:
8 mm
Pvc Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Motor Poles:
10
Rotor Inertia:
0.0232 kg.cm²
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
0.2 x Fr
Continuous Power:
220 W
Electrical Connection:
rotatable right-angled connectors
Feedback Type:
single turn SinCos Hiperface
Motor Flange Size:
40 mm
Key Width:
12 mm
Continuous Stall Current:
1.12 A
Maximum Current Irms:
4.7 A LXM32.U60N4 480 V || 4.7 A LXM32.U60N4 400 V || 4.7 A LXM32.U45M2 230 V
Switching Frequency:
8 kHz
Length:
73.4 mm
Continuous Stall Torque:
0.21 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.21 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.21 N.m LXM32.U45M2 1.5 A, 230 V, single phase
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Speed:
9000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 9000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 4000 rpm LXM32.U45M2 1.5 A, 230 V, single phase
