Schneider Electric BSH0551P11F2A Bsh Motor Iec 55Mm 0,5 Nm With Key Ip50
SKU:
BSH0551P11F2A
UPC:
3389118198616
MPN:
Condition:
New
Type Of Cooling:
natural convection
Switching Frequency:
8 kHz
Shaft Length:
20 mm
Torque Constant:
0.7 N.m/A 120 °C
Motor Flange Size:
55 mm
Maximum Axial Force Fa:
0.2 x Fr
Device Short Name:
BSH
Number Of Mounting Holes:
4
Environmental Disclosure:
ENVPEP111049EN
Centring Collar Depth:
2 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Nominal Output Power:
300 W LXM32.U60N4 1.5 A, 400 V, three phase || 300 W LXM32.U60N4 1.5 A, 480 V, three phase || 170 W LXM15LD13M3, 230 V, single phase || 170 W LXM15LU60N4, 230 V, three phase
Stator Electrical Time Constant:
1.09 ms 20 °C
Feedback Type:
single turn SinCos Hiperface
Stator Resistance:
41.8 Ohm 20 °C
Rotor Inertia:
0.083 kg.cm²
Product Or Component Type:
servo motor
Product Compatibility:
LXM15LD13M3 230 V single phase || LXM15LU60N4 230 V three phase || LXM32.U60N4 400 V three phase || LXM32.U60N4 480 V three phase
Pvc Free:
Yes
Electrical Connection:
rotatable right-angled connectors
Warranty:
18 months
Maximum Current Irms:
3.5 A LXM15LD13M3 || 3.5 A LXM15LU60N4 || 2.9 A LXM32.U60N4
Shaft End:
keyed
Second Shaft:
without second shaft end
Back Emf Constant:
40 V/krpm 120 °C
Shaft Diameter:
9 mm
Range Compatibility:
Lexium 32 || Lexium 15
Ip Degree Of Protection:
IP50 standard
Maximum Radial Force Fr:
170 N 8000 rpm || 180 N 7000 rpm || 190 N 6000 rpm || 200 N 5000 rpm || 220 N 4000 rpm || 240 N 3000 rpm || 270 N 2000 rpm || 340 N 1000 rpm
Key Width:
12 mm
Circularity Profile:
N/A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Speed:
6000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 6000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 4000 rpm LXM15LD13M3, 230 V, single phase || 4000 rpm LXM15LU60N4, 230 V, three phase
Maximum Mechanical Speed:
9000 rpm
Mounting Support:
international standard flange
Speed Feedback Resolution:
131072 points/turn
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circle Diameter Of The Mounting Holes:
63 mm
China Rohs Regulation:
X
Holding Brake:
with
Sustainable Offer Status:
Green Premium product
Phase:
three phase
Continuous Stall Current:
0.73 A
Stator Inductance:
71.5 mH 20 °C
Length:
159 mm
Holding Torque:
0.8 N.m holding brake
Continuous Power:
0.45 W
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
0.48 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.48 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.46 N.m LXM15LD13M3, 230 V, single phase || 0.46 N.m LXM15LU60N4, 230 V, three phase
Mounting Holes Diameter:
5.5 mm
Brake Pull-In Power:
10 W
Maximum Permanent Current:
2.9 A
Centring Collar Diameter:
40 mm
Mercury Free:
Yes
Peak Stall Torque:
1.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM15LD13M3, 230 V, single phase || 1.4 N.m LXM15LU60N4, 230 V, three phase
Net Weight:
1.3 kg
Number Of Motor Poles:
6
[Us] Rated Supply Voltage:
480 V
Number Of Motor Stacks:
1
Continuous Stall Torque:
0.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.5 N.m LXM15LD13M3, 230 V, single phase || 0.5 N.m LXM15LU60N4, 230 V, three phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 6-pole AC servo motor features maximum mechanical speed of 9000RPM and keyed shaft end without holding...