Schneider Electric BSH0551P12F2A Bsh Motor Iec 55Mm 0,5 Nm With Key Ip50
SKU:
BSH0551P12F2A
UPC:
3389118198654
MPN:
Condition:
New
Stator Resistance:
41.8 Ohm 20 °C
Continuous Stall Current:
0.73 A
Type Of Cooling:
natural convection
Nominal Output Power:
300 W LXM32.U60N4 1.5 A, 400 V, three phase || 300 W LXM32.U60N4 1.5 A, 480 V, three phase || 170 W LXM15LD13M3, 230 V, single phase || 170 W LXM15LU60N4, 230 V, three phase
Electrical Connection:
rotatable right-angled connectors
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Speed:
6000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 6000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 4000 rpm LXM15LD13M3, 230 V, single phase || 4000 rpm LXM15LU60N4, 230 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Motor Poles:
6
Peak Stall Torque:
1.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM15LD13M3, 230 V, single phase || 1.4 N.m LXM15LU60N4, 230 V, three phase
Nominal Torque:
0.48 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.48 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.46 N.m LXM15LD13M3, 230 V, single phase || 0.46 N.m LXM15LU60N4, 230 V, three phase
Centring Collar Diameter:
40 mm
Maximum Radial Force Fr:
170 N 8000 rpm || 180 N 7000 rpm || 190 N 6000 rpm || 200 N 5000 rpm || 220 N 4000 rpm || 240 N 3000 rpm || 270 N 2000 rpm || 340 N 1000 rpm
Centring Collar Depth:
2 mm
Sustainable Offer Status:
Green Premium product
Stator Inductance:
71.5 mH 20 °C
Phase:
three phase
Circularity Profile:
N/A
Brake Pull-In Power:
10 W
Maximum Current Irms:
3.5 A LXM15LD13M3 || 3.5 A LXM15LU60N4 || 2.9 A LXM32.U60N4
Length:
159 mm
Mounting Support:
international standard flange
Key Width:
12 mm
Pvc Free:
Yes
Shaft End:
keyed
Ip Degree Of Protection:
IP50 standard
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
480 V
Product Or Component Type:
servo motor
Second Shaft:
without second shaft end
Motor Flange Size:
55 mm
Shaft Length:
20 mm
Net Weight:
1.3 kg
Product Compatibility:
LXM15LD13M3 230 V single phase || LXM15LU60N4 230 V three phase || LXM32.U60N4 400 V three phase || LXM32.U60N4 480 V three phase
Maximum Mechanical Speed:
9000 rpm
Holding Torque:
0.8 N.m holding brake
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Mounting Holes Diameter:
5.5 mm
Torque Constant:
0.7 N.m/A 120 °C
Continuous Stall Torque:
0.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.5 N.m LXM15LD13M3, 230 V, single phase || 0.5 N.m LXM15LU60N4, 230 V, three phase
Rotor Inertia:
0.083 kg.cm²
Feedback Type:
multiturn SinCos Hiperface
Stator Electrical Time Constant:
1.09 ms 20 °C
Device Short Name:
BSH
Holding Brake:
with
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
Maximum Axial Force Fa:
0.2 x Fr
Switching Frequency:
8 kHz
Maximum Permanent Current:
2.9 A
Range Compatibility:
Lexium 32 || Lexium 15
Shaft Diameter:
9 mm
Continuous Power:
0.45 W
Number Of Motor Stacks:
1
Warranty:
18 months
China Rohs Regulation:
X
Circle Diameter Of The Mounting Holes:
63 mm
Number Of Mounting Holes:
4
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
