Schneider Electric HGA260151 Molded Case Circuit Breaker 600V 15A

(No reviews yet) Write a Review
SKU:
HGA260151
UPC:
785901539674
Condition:
New
Warranty:
18 months
Range:
PowerPact
Quantity Per Set:
1
Color:
Black
Device Application:
distribution
Ip Degree Of Protection:
front cover IP40 IEC 60529
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Breaking Capacity Code:
G
Protected Poles Description:
2t
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP1311006EN
Trip Unit Technology:
thermal-magnetic
Ambient Air Temperature For Operation:
-2-70 °C
Pollution Degree:
3 IEC 60947-1
Width:
104 mm
Rohs Exemption Information:
Yes
Wire Stripping Length:
16 mm
Suitability For Isolation:
yes IEC 60947-2
Eu Rohs Directive:
Compliant
Poles Description:
2P
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Control Type:
toggle
Mounting Height:
3 in
Circularity Profile:
ENVEOLI1311006EN
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Terminal Identifier:
AL150HD
Ambient Air Temperature For Storage:
-50-85 °C
Pvc Free:
Yes
Mounting Support:
bracket
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Depth:
86 mm
Mounting Mode:
I-Line bracket)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Network Frequency:
50/60 Hz
Circuit Breaker Application:
HACR rated
Magnetic Tripping Current:
750-750 A
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Net Weight:
2.2 kg
Height:
163 mm
Utilisation Category:
category A
Product Certifications:
UL || CSA || NOM
Continuous Current Rating:
0.8
Local Signalling:
switched off (OFF) 1 trip indicator green)
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Product Name:
PowerPact H
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Phase Connection:
AB
Communication Interface:
Modbus || Ethernet
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Magnetic Hold Current:
350 A
Electrical Connection:
I-Line connection, line || lugs, load
Mercury Free:
Yes
Quality Labels:
CE
Line Rated Current:
15-15 A
Product Or Component Type:
circuit breaker
Brochure:
View
Catalog:
View
Datasheet:
View
$2,007.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 15A, 2 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an AB phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose