Schneider Electric HGA36100U43X Molded Case Circuit Breaker 600V 100A

(No reviews yet) Write a Review
SKU:
HGA36100U43X
UPC:
3.60649E+12
Condition:
New
Ip Degree Of Protection:
front cover IP40 IEC 60529
Ambient Air Temperature For Operation:
-2-70 °C
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Sustainable Offer Status:
Green Premium product
Quantity Per Set:
1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mounting Mode:
I-Line bracket)
Electrical Connection:
I-Line connection, line || lugs, load
Control Type:
toggle
Communication Interface:
Modbus || Ethernet
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Rohs Exemption Information:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Breaking Capacity Code:
G
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Net Weight:
2.2 kg
Color:
Black
Range:
PowerPact
Width:
104 mm
Mounting Support:
bracket
Suitability For Isolation:
yes IEC 60947-2
Pvc Free:
Yes
Continuous Current Rating:
0.8
Ambient Air Temperature For Storage:
-50-85 °C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Warranty:
18 months
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Terminal Identifier:
AL150HD
Phase Connection:
ABC
Mounting Height:
4.5 in
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Trip Unit Technology:
electronic, ammeter, MicroLogic 5.2 A, LSI
Depth:
86 mm
Mercury Free:
Yes
Trip Unit Name:
MicroLogic 5.2 A
Product Certifications:
UL || CSA || NOM
Height:
163 mm
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Network Frequency:
50/60 Hz
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Utilisation Category:
category A
Circularity Profile:
ENVEOLI2206028EN
Pollution Degree:
3 IEC 60947-1
Poles Description:
3P
Protected Poles Description:
3t
Circuit Breaker Application:
HACR rated
Product Or Component Type:
circuit breaker
Wire Stripping Length:
16 mm
Device Application:
distribution
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Quality Labels:
CE
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Product Name:
PowerPact H
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Eu Rohs Directive:
Compliant with Exemptions
Line Rated Current:
100-100 A
Environmental Disclosure:
ENVPEP2206028EN
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric HGA36100U43X Molded Case Circuit Breaker 600V 100A
  • Schneider Electric HGA36100U43X Molded Case Circuit Breaker 600V 100A
$2,789.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Ammeter with a 5.2A trip unit and an LSI function with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 100A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose