Schneider Electric HJA36015 Molded Case Circuit Breaker 600V 15A

(No reviews yet) Write a Review
SKU:
HJA36015
UPC:
785901419044
Condition:
New
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Device Application:
distribution
Protected Poles Description:
3t
Poles Description:
3P
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Communication Interface:
Modbus || Ethernet
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Continuous Current Rating:
0.8
Depth:
86 mm
Ip Degree Of Protection:
front cover IP40 IEC 60529
Width:
104 mm
Rohs Exemption Information:
Yes
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Mounting Height:
4.5 in
Circularity Profile:
ENVEOLI2206027EN
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Ambient Air Temperature For Operation:
-2-70 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Suitability For Isolation:
yes IEC 60947-2
Breaking Capacity Code:
J
Local Signalling:
switched off (OFF) 1 trip indicator green)
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Magnetic Hold Current:
350 A
Network Frequency:
50/60 Hz
Electrical Connection:
I-Line connection, line || lugs, load
Color:
Black
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Quantity Per Set:
1
Circuit Breaker Application:
HACR rated
Product Or Component Type:
circuit breaker
Range:
PowerPact
Warranty:
18 months
Mercury Free:
Yes
Mounting Mode:
I-Line bracket)
Height:
163 mm
Phase Connection:
ABC
Wire Stripping Length:
16 mm
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Name:
PowerPact H
Quality Labels:
CE
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Ambient Air Temperature For Storage:
-50-85 °C
Magnetic Tripping Current:
750-750 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Compliant with Exemptions
Sustainable Offer Status:
Green Premium product
Utilisation Category:
category A
Trip Unit Technology:
thermal-magnetic
Line Rated Current:
15-15 A
Control Type:
toggle
Pollution Degree:
3 IEC 60947-1
Pvc Free:
Yes
Mounting Support:
bracket
Terminal Identifier:
AL150HD
Product Certifications:
UL || CSA || NOM
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Net Weight:
2.2 kg
Environmental Disclosure:
ENVPEP2206027EN
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric HJA36015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HJA36015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HJA36015 Molded Case Circuit Breaker 600V 15A
$1,988.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 15A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose