Schneider Electric HJL36015 Molded Case Circuit Breaker 600V 15A

(No reviews yet) Write a Review
SKU:
HJL36015
UPC:
785901577904
Condition:
New
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Trip Unit Technology:
thermal-magnetic
Terminal Identifier:
AL150HD
Poles Description:
3P
Pollution Degree:
3 IEC 60947-1
Product Certifications:
UL || CSA || NOM
Local Signalling:
switched off (OFF) 1 trip indicator green)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Network Frequency:
50/60 Hz
Utilisation Category:
category A
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Device Application:
distribution
Mounting Support:
lug
Net Weight:
2.2 kg
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Sustainable Offer Status:
Green Premium product
Circuit Breaker Application:
HACR rated
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
Magnetic Hold Current:
350 A
Product Or Component Type:
circuit breaker
Ambient Air Temperature For Storage:
-50-85 °C
Color:
Black
Depth:
86 mm
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Protected Poles Description:
3t
Mercury Free:
Yes
Magnetic Tripping Current:
750-750 A
Mounting Mode:
unit mount lug)
Width:
104 mm
Communication Interface:
Modbus || Ethernet
Electrical Connection:
lugs, line || lugs, load
Range:
PowerPact
Eu Rohs Directive:
Compliant with Exemptions
Quantity Per Set:
1
Height:
163 mm
Circularity Profile:
ENVEOLI2206027EN
Pvc Free:
Yes
Continuous Current Rating:
0.8
Wire Stripping Length:
16 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Warranty:
18 months
Breaking Capacity Code:
J
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Ambient Air Temperature For Operation:
-2-70 °C
Line Rated Current:
15-15 A
Environmental Disclosure:
ENVPEP2206027EN
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
front cover IP40 IEC 60529
Rohs Exemption Information:
Yes
Product Name:
PowerPact H
Control Type:
toggle
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Quality Labels:
CE
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric HJL36015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HJL36015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HJL36015 Molded Case Circuit Breaker 600V 15A
$1,949.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 15A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose