Schneider Electric HJL36060U33X Molded Case Circuit Breaker 600V 60A

(No reviews yet) Write a Review
SKU:
HJL36060U33X
UPC:
785901726975
Condition:
New
Terminal Identifier:
AL150HD
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Poles Description:
3P
Product Name:
PowerPact H
Mounting Support:
lug
Ambient Air Temperature For Storage:
-50-85 °C
Electrical Connection:
lugs, line || lugs, load
Product Or Component Type:
circuit breaker
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Quality Labels:
CE
Communication Interface:
Modbus || Ethernet
Breaking Capacity Code:
J
Ambient Air Temperature For Operation:
-2-70 °C
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Eu Rohs Directive:
Compliant with Exemptions
Ip Degree Of Protection:
front cover IP40 IEC 60529
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Warranty:
18 months
Mercury Free:
Yes
Protected Poles Description:
3t
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Height:
163 mm
Wire Stripping Length:
16 mm
Range:
PowerPact
Pollution Degree:
3 IEC 60947-1
Product Certifications:
UL || CSA || NOM
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP2206028EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Circularity Profile:
ENVEOLI2206028EN
Depth:
86 mm
Line Rated Current:
60-60 A
Circuit Breaker Application:
HACR rated
Suitability For Isolation:
yes IEC 60947-2
Trip Unit Name:
MicroLogic 3.2 S
Color:
Black
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Control Type:
toggle
Device Application:
distribution
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Quantity Per Set:
1
Mounting Mode:
unit mount lug)
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Width:
104 mm
Net Weight:
2.2 kg
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Network Frequency:
50/60 Hz
Continuous Current Rating:
0.8
Utilisation Category:
category A
$2,294.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 60A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose