Schneider Electric HJL36150SA Molded Case Circuit Breaker 600V 150A
Schneider Electric
$5,891.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric HJL36150SA Molded Case Circuit Breaker 600V 150A
PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a factory installed 120VAC shunt trip. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- Suitability For Isolation:
- yes IEC 60947-2
- Warranty:
- 18 months
- Quality Labels:
- CE
- Rohs Exemption Information:
- Yes
- Ambient Air Temperature For Operation:
- -2-70 °C
- Magnetic Tripping Current:
- 1700-1700 A
- Standards:
- UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
- Control Type:
- toggle
- [Ics] Rated Service Breaking Capacity:
- 65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
- Product Certifications:
- UL || CSA || NOM
- Sustainable Offer Status:
- Green Premium product
- Communication Interface:
- Modbus || Ethernet
- Breaking Capacity:
- 100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
- Color:
- Black
- Circularity Profile:
- ENVEOLI2206027EN
- Continuous Current Rating:
- 0.8
- Environmental Disclosure:
- ENVPEP2206027EN
- Electrical Connection:
- lugs, line || lugs, load
- Ip Degree Of Protection:
- front cover IP40 IEC 60529
- Network Frequency:
- 50/60 Hz
- Quantity Per Set:
- 1
- Tightening Torque:
- 5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
- Device Application:
- distribution
- Trip Unit Technology:
- thermal-magnetic
- [Ue] Rated Operational Voltage:
- 690 V AC 50/60 Hz IEC 60947-3
- Width:
- 104 mm
- Mounting Mode:
- unit mount lug)
- Terminal Identifier:
- AL150HD
- Utilisation Category:
- category A
- Product Name:
- PowerPact H
- Number Of Slots:
- 2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
- Eu Rohs Directive:
- Compliant with Exemptions
- Pvc Free:
- Yes
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Mercury Free:
- Yes
- [Ui] Rated Insulation Voltage:
- 750 V IEC 60947-2
- Line Rated Current:
- 150-150 A
- Operating Altitude:
- < 6561.68 ft (2000 m) without derating || 5000 m with derating
- Depth:
- 86 mm
- Pollution Degree:
- 3 IEC 60947-1
- Mounting Support:
- lug
- Height:
- 163 mm
- Net Weight:
- 2.2 kg
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Awg Gauge:
- AWG 14...AWG 3/0 aluminium/copper terminal
- Product Or Component Type:
- circuit breaker
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- Accessory / Separate Part Type:
- shunt trip 110...130 V AC compartment
- Magnetic Hold Current:
- 900 A
- Ambient Air Temperature For Storage:
- -50-85 °C
- Circuit Breaker Application:
- HACR rated
- Poles Description:
- 3P
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947-2
- Protected Poles Description:
- 3t
- Local Signalling:
- switched off (OFF) 1 trip indicator green)
- Breaking Capacity Code:
- J
- Wire Stripping Length:
- 16 mm
- Range:
- PowerPact
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
