Schneider Electric HJL36150U43X Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HJL36150U43X
UPC:
785901505969
Condition:
New
Poles Description:
3P
Environmental Disclosure:
ENVPEP2206028EN
Pvc Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Ip Degree Of Protection:
front cover IP40 IEC 60529
Suitability For Isolation:
yes IEC 60947-2
Product Or Component Type:
circuit breaker
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Sustainable Offer Status:
Green Premium product
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Mercury Free:
Yes
Device Application:
distribution
Communication Interface:
Modbus || Ethernet
Range:
PowerPact
Product Certifications:
UL || CSA || NOM
Wire Stripping Length:
16 mm
Trip Unit Name:
MicroLogic 5.2 A
Electrical Connection:
lugs, line || lugs, load
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Network Frequency:
50/60 Hz
Depth:
86 mm
Net Weight:
2.2 kg
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Ambient Air Temperature For Storage:
-50-85 °C
Mounting Mode:
unit mount lug)
Mounting Support:
lug
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Width:
104 mm
Trip Unit Technology:
electronic, ammeter, MicroLogic 5.2 A, LSI
Eu Rohs Directive:
Compliant with Exemptions
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Continuous Current Rating:
0.8
Circuit Breaker Application:
HACR rated
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Terminal Identifier:
AL150HD
Ambient Air Temperature For Operation:
-2-70 °C
Color:
Black
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Control Type:
toggle
Quantity Per Set:
1
Breaking Capacity Code:
J
Rohs Exemption Information:
Yes
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Quality Labels:
CE
Circularity Profile:
ENVEOLI2206028EN
Protected Poles Description:
3t
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Warranty:
18 months
Product Name:
PowerPact H
Utilisation Category:
category A
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Pollution Degree:
3 IEC 60947-1
Line Rated Current:
150-150 A
Height:
163 mm
Brochure:
View
Catalog:
View
Datasheet:
View
$6,117.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Ammeter with a 5.2A trip unit and an LSI function with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose