Schneider Electric HLL36100LV Molded Case Circuit Breaker 600V 100A
Schneider Electric
$3,202.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric HLL36100LV Molded Case Circuit Breaker 600V 100A
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 50kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 100A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a control wire terminal on the load end. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- Eu Rohs Directive:
- Compliant with Exemptions
- Warranty:
- 18 months
- Height:
- 163 mm
- Product Name:
- PowerPact H
- Suitability For Isolation:
- yes IEC 60947-2
- Network Frequency:
- 50/60 Hz
- Poles Description:
- 3P
- [Ui] Rated Insulation Voltage:
- 750 V IEC 60947-2
- Terminal Identifier:
- AL150HD
- Breaking Capacity Code:
- L
- Ambient Air Temperature For Operation:
- -2-70 °C
- Communication Interface:
- Modbus || Ethernet
- Depth:
- 86 mm
- Magnetic Tripping Current:
- 1700-1700 A
- Electrical Connection:
- lugs, line || lugs, load
- Product Certifications:
- UL || CSA || NOM
- Standards:
- UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
- Color:
- Black
- Product Or Component Type:
- circuit breaker
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Width:
- 104 mm
- [Ue] Rated Operational Voltage:
- 690 V AC 50/60 Hz IEC 60947-3
- Sustainable Offer Status:
- Green Premium product
- Line Rated Current:
- 100-100 A
- Environmental Disclosure:
- ENVPEP2206027EN
- Local Signalling:
- switched off (OFF) 1 trip indicator green)
- Number Of Slots:
- 2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
- Pvc Free:
- Yes
- Control Type:
- toggle
- Tightening Torque:
- 5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
- Accessory / Separate Part Type:
- control wire OFF end
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- Magnetic Hold Current:
- 900 A
- Operating Altitude:
- < 6561.68 ft (2000 m) without derating || 5000 m with derating
- Rohs Exemption Information:
- Yes
- Continuous Current Rating:
- 0.8
- Ip Degree Of Protection:
- front cover IP40 IEC 60529
- Mercury Free:
- Yes
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947-2
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- [Ics] Rated Service Breaking Capacity:
- 125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
- Quantity Per Set:
- 1
- Mounting Support:
- lug
- Mounting Mode:
- unit mount lug)
- Circularity Profile:
- ENVEOLI2206027EN
- Range:
- PowerPact
- Quality Labels:
- CE
- Pollution Degree:
- 3 IEC 60947-1
- Breaking Capacity:
- 125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
- Trip Unit Technology:
- thermal-magnetic
- Awg Gauge:
- AWG 14...AWG 3/0 aluminium/copper terminal
- Wire Stripping Length:
- 16 mm
- Ambient Air Temperature For Storage:
- -50-85 °C
- Protected Poles Description:
- 3t
- Utilisation Category:
- category A
- Net Weight:
- 2.2 kg
- Circuit Breaker Application:
- HACR rated
- Device Application:
- distribution
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
