Schneider Electric HRA36150U31X Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HRA36150U31X
UPC:
7.85902E+11
Condition:
New
Protected Poles Description:
3t
Product Certifications:
UL || CSA || NOM
Breaking Capacity Code:
R
Circuit Breaker Application:
HACR rated
Terminal Identifier:
AL150HD
Control Type:
toggle
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Electrical Connection:
I-Line connection, line || lugs, load
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
Circularity Profile:
ENVEOLI2206028EN
Pollution Degree:
3 IEC 60947-1
Net Weight:
2.2 kg
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Suitability For Isolation:
yes IEC 60947-2
Trip Unit Name:
MicroLogic 3.2
Ip Degree Of Protection:
front cover IP40 IEC 60529
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Mounting Support:
bracket
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Communication Interface:
Modbus || Ethernet
Range:
PowerPact
Ambient Air Temperature For Operation:
-2-70 °C
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mounting Height:
4.5 in
Sustainable Offer Status:
Green Premium product
Wire Stripping Length:
16 mm
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
Line Rated Current:
150-150 A
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Mounting Mode:
I-Line bracket)
Pvc Free:
Yes
Device Application:
distribution
Ambient Air Temperature For Storage:
-50-85 °C
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Color:
Black
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Utilisation Category:
category A
Height:
163 mm
Poles Description:
3P
Mercury Free:
Yes
Phase Connection:
ABC
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Quality Labels:
CE
Depth:
86 mm
Environmental Disclosure:
ENVPEP2206028EN
Product Name:
PowerPact H
Product Or Component Type:
circuit breaker
Eu Rohs Directive:
Compliant with Exemptions
Width:
104 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Quantity Per Set:
1
Continuous Current Rating:
0.8
Rohs Exemption Information:
Yes
Network Frequency:
50/60 Hz
  • Schneider Electric HRA36150U31X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HRA36150U31X Molded Case Circuit Breaker 600V 150A
$9,631.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 100kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 100kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose