Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Rotor Inertia:
0.173 kg.cm²
Shaft End:
untapped
Input/Output Type:
4 signals (each be used as input or output)
Centring Collar Depth:
1.6 mm
Ambient Air Temperature For Storage:
-25-70 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Centring Collar Diameter:
50 mm
Environmental Disclosure:
ENVPEP2011004EN
Shaft Diameter:
9 mm
Maximum Radial Force Fr:
107 N
Shock Resistance:
150 m/s² 1000 shocks EN/IEC 60068-2-29
Current Consumption:
7000 mA maximum continuous || 8500 mA peak
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Protection Type:
safe torque off || short circuit of the output voltage || overload of output voltage
Product Certifications:
TÃV || UL || cUL
Maximum Switching Current:
100 mA per output || 200 mA total
Accuracy Error:
+/- 0.05 °
Relative Humidity:
15-85 % without condensation
Holding Brake:
without
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Service Life In Hours:
20000 h bearing
Number Of Motor Poles:
6
Number Of Motor Stacks:
2
Continuous Stall Torque:
0.78 N.m
Second Shaft:
without second shaft end
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Sustainable Offer Status:
Green Premium product
Discrete Output Voltage:
23...25 V
Net Weight:
1.7 kg
Mercury Free:
Yes
Circularity Profile:
ENVEOLI2011004EN
Standards:
EN 61800-3:2001, second environment || IEC 60072-1 || IEC 61800-3, Ed 2 || EN/IEC 50178 || EN 61800-3 : 2001-02 || EN 50347 || EN/IEC 61800-3
Shaft Length:
20 mm
Supply Voltage Limits:
18-55.2 V
Number Of Mounting Holes:
4
Motor Flange Size:
57 mm
Discrete Input Current:
10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
Communication Interface:
EtherCAT, Integrated
Range Of Product:
Lexium integrated drive
Transmission Rate:
100 Mbits
Circle Diameter Of The Mounting Holes:
66.6 mm
Voltage State 1 Guaranteed:
15...30 V
Motor Type:
AC Synchronous Servo Motor
Product Or Component Type:
motion integrated drive
China Rohs Regulation:
X
Mounting Holes Diameter:
5.2 mm
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6
Speed Feedback Resolution:
16384 points/turn x 4096 turns
Length:
207.8 mm
Type Of Cooling:
natural convection
Phase:
single phase
Mounting Support:
flange
Winding Type:
medium speed of rotation and medium torque
Nominal Torque:
0.78 N.m
Warranty:
18 months
Maximum Axial Force Fa:
104 N force pressure) || 104 N tensile force)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
