Schneider Electric

Schneider Electric ILA2K571TC2A0 Lexium Ila Servomot 24 48V Eth Ip Multit

(No reviews yet) Write a Review
SKU:
ILA2K571TC2A0
UPC:
3606485204543
Condition:
New
Supply Voltage Limits:
18-55.2 V
Phase:
single phase
Communication Interface:
Ethernet/IP, Integrated
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Accuracy Error:
+/- 0.05 °
Sustainable Offer Status:
Green Premium product
Centring Collar Depth:
1.6 mm
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Environmental Disclosure:
ENVPEP2011004EN
Discrete Input Current:
10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
Electrical Connection:
industrial connector
Voltage State 1 Guaranteed:
15...30 V
Range Of Product:
Lexium integrated drive
Service Life In Hours:
20000 h bearing
Maximum Switching Current:
100 mA per output || 200 mA total
Rotor Inertia:
0.095 kg.cm²
Discrete Output Voltage:
23...25 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Relative Humidity:
15-85 % without condensation
Nominal Speed:
5000 rpm 24 V || 7000 rpm 48 V
Maximum Axial Force Fa:
104 N force pressure) || 104 N tensile force)
Pvc Free:
Yes
Transmission Rate:
125, 250, 500 kbauds
Voltage State 0 Guaranteed:
-3...4.5 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Ambient Air Temperature For Storage:
-25-70 °C
Protection Type:
safe torque off || short circuit of the output voltage || overload of output voltage
Rohs Exemption Information:
Yes
Feedback Type:
multi turn encoder
Shaft Length:
20 mm
Second Shaft:
without second shaft end
Nominal Torque:
0.31 N.m
Input/Output Type:
4 signals (each be used as input or output)
Mercury Free:
Yes
Maximum Radial Force Fr:
89 N
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Continuous Stall Torque:
0.31 N.m
Motor Type:
AC Synchronous Servo Motor
Holding Brake:
without
Mounting Support:
flange
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Marking:
CE
Network Type:
DC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Winding Type:
high speed of rotation and medium torque
Centring Collar Diameter:
50 mm
Net Weight:
1.4 kg
Current Consumption:
11000 mA peak || 7500 mA maximum continuous
Shaft Diameter:
9 mm
Circle Diameter Of The Mounting Holes:
66.6 mm
Warranty:
18 months
Device Short Name:
ILA
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Gear Box Type:
without
Product Certifications:
TÜV || UL || cUL
Length:
189.3 mm
Number Of Motor Stacks:
1
Number Of Motor Poles:
6
Ambient Air Temperature For Operation:
40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
Speed Feedback Resolution:
16384 points/turn x 4096 turns
Motor Flange Size:
57 mm
Circularity Profile:
ENVEOLI2011004EN
Mounting Holes Diameter:
5.2 mm
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Product Or Component Type:
motion integrated drive
China Rohs Regulation:
X
Shaft End:
untapped
Standards:
IEC 60072-1 || EN 61800-3:2001, second environment || IEC 50178 || IEC 61800-3, Ed 2 || IEC 61800-3 || IEC 50347 || EN 61800-3 : 2001-02
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Associated Fuse Rating:
16 A
Peak Stall Torque:
0.45 N.m
[Us] Rated Supply Voltage:
48 V || 24 V
Catalog:
View
Datasheet:
View
$2,365.00

Description

This product is part of the Lexium ILA range, an offer of motion integrated drives for motion control. The motion integrated drive with a 6-pole AC synchronous servo motor features an integrated EtherNet/IP communication interface and untapped shaft without holding brake. It is an equipped with a multi-turn encoder (16,384 points/turn x 4096 turns). The AC synchronous servo motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 11000mA and a nominal speed of 7000RPM at 48V. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 189.3mm (length) x 57mm (width) and the centering collar dimensions are 1.6mm (depth) x 50mm (diameter) with 66.6mm mounting hole. It weighs 1.4kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose