Schneider Electric ILA2K572PB1A0 Lexium Ila Servomot 24 48V Eth Ip Enc

(No reviews yet) Write a Review
SKU:
ILA2K572PB1A0
UPC:
3606485204550
Condition:
New
Holding Brake:
without
Network Type:
DC
Shaft End:
untapped
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Circle Diameter Of The Mounting Holes:
66.6 mm
Transmission Rate:
125, 250, 500 kbauds
Discrete Input Current:
10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
Motor Type:
AC Synchronous Servo Motor
Net Weight:
1.7 kg
Discrete Output Voltage:
23...25 V
Winding Type:
medium speed of rotation and medium torque
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Product Or Component Type:
motion integrated drive
Motor Flange Size:
57 mm
Circularity Profile:
ENVEOLI2011004EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Type Of Cooling:
natural convection
Mounting Support:
flange
Nominal Speed:
1600 rpm 24 V || 3400 rpm 48 V
Centring Collar Depth:
1.6 mm
Voltage State 1 Guaranteed:
15...30 V
Ambient Air Temperature For Operation:
40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
Mercury Free:
Yes
Centring Collar Diameter:
50 mm
Number Of Motor Poles:
6
Shaft Length:
20 mm
Feedback Type:
single turn encoder
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
single phase
Speed Feedback Resolution:
16384 points/turn
Input/Output Type:
4 signals (each be used as input or output)
Supply Voltage Limits:
18-55.2 V
Number Of Motor Stacks:
2
Communication Interface:
Ethernet/IP, Integrated
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Maximum Radial Force Fr:
107 N
Shaft Diameter:
9 mm
Current Consumption:
7000 mA maximum continuous || 8500 mA peak
Length:
163.8 mm
Marking:
CE
Second Shaft:
without second shaft end
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Service Life In Hours:
20000 h bearing
Product Certifications:
cUL || UL || TÜV
Electrical Connection:
printed circuit board connector
Pvc Free:
Yes
Warranty:
18 months
Device Short Name:
ILA
Peak Stall Torque:
1.62 N.m
Mounting Holes Diameter:
5.2 mm
Rotor Inertia:
0.173 kg.cm²
Nominal Torque:
0.78 N.m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Relative Humidity:
15-85 % without condensation
Continuous Stall Torque:
0.78 N.m
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Ambient Air Temperature For Storage:
-25-70 °C
Associated Fuse Rating:
16 A
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP2011004EN
Accuracy Error:
+/- 0.05 °
Number Of Mounting Holes:
4
Range Of Product:
Lexium integrated drive
Protection Type:
safe torque off || overload of output voltage || short circuit of the output voltage
Maximum Axial Force Fa:
104 N force pressure) || 104 N tensile force)
Voltage State 0 Guaranteed:
-3...4.5 V
[Us] Rated Supply Voltage:
48 V || 24 V
Maximum Switching Current:
100 mA per output || 200 mA total
China Rohs Regulation:
X
Standards:
IEC 60072-1 || IEC 61800-3, Ed 2 || EN 61800-3:2001, second environment || IEC 50178 || IEC 61800-3 || IEC 50347 || EN 61800-3 : 2001-02
Gear Box Type:
without
Rohs Exemption Information:
Yes
Catalog:
View
Datasheet:
View
$1,635.00

Description

This product is part of the Lexium ILA range, an offer of motion integrated drives for motion control. The motion integrated drive with a 6-pole AC synchronous servo motor features an integrated EtherNet/IP communication interface and untapped shaft without holding brake. It is an equipped with a single-turn encoder (16,384 points/turn). The AC synchronous servo motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 8500mA and a nominal speed of 3400RPM at 48V. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with printed circuit board connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 163.8mm (length) x 57mm (width) and the centering collar dimensions are 1.6mm (depth) x 50mm (diameter) with 66.6mm mounting hole. It weighs 1.7kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose