Schneider Electric ILA2K572PC1A0 Lexium Ila Servomot 24 48V Eth Ip Enc

(No reviews yet) Write a Review
SKU:
ILA2K572PC1A0
UPC:
3.60649E+12
Condition:
New
Nominal Torque:
0.78 N.m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Axial Force Fa:
104 N force pressure) || 104 N tensile force)
Associated Fuse Rating:
16 A
Shaft Diameter:
9 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Motor Stacks:
2
Communication Interface:
Ethernet/IP, Integrated
Speed Feedback Resolution:
16384 points/turn
Standards:
IEC 50347 || IEC 50178 || IEC 61800-3 || IEC 60072-1 || IEC 61800-3, Ed 2 || EN 61800-3 : 2001-02 || EN 61800-3:2001, second environment
Net Weight:
1.7 kg
Rotor Inertia:
0.173 kg.cm²
Circularity Profile:
ENVEOLI2011004EN
Accuracy Error:
+/- 0.05 °
Relative Humidity:
15-85 % without condensation
Transmission Rate:
125, 250, 500 kbauds
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Number Of Mounting Holes:
4
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Mounting Holes Diameter:
5.2 mm
Supply Voltage Limits:
18-55.2 V
Device Short Name:
ILA
[Us] Rated Supply Voltage:
24 V || 48 V
Phase:
single phase
Continuous Stall Torque:
0.78 N.m
Winding Type:
medium speed of rotation and medium torque
Gear Box Type:
without
Holding Brake:
without
Type Of Cooling:
natural convection
Centring Collar Diameter:
50 mm
Number Of Motor Poles:
6
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Product Or Component Type:
motion integrated drive
Discrete Input Current:
10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
Ambient Air Temperature For Operation:
40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
Maximum Radial Force Fr:
107 N
Network Type:
DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Voltage State 0 Guaranteed:
-3...4.5 V
Input/Output Type:
4 signals (each be used as input or output)
Marking:
CE
Discrete Output Voltage:
23...25 V
Pvc Free:
Yes
Current Consumption:
7000 mA maximum continuous || 8500 mA peak
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Peak Stall Torque:
1.62 N.m
Shaft Length:
20 mm
Protection Type:
short circuit of the output voltage || safe torque off || overload of output voltage
Shaft End:
untapped
Environmental Disclosure:
ENVPEP2011004EN
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Service Life In Hours:
20000 h bearing
Range Of Product:
Lexium integrated drive
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Length:
163.8 mm
Motor Flange Size:
57 mm
Mercury Free:
Yes
Mounting Support:
flange
Feedback Type:
single turn encoder
Rohs Exemption Information:
Yes
Ambient Air Temperature For Storage:
-25-70 °C
Electrical Connection:
industrial connector
China Rohs Regulation:
X
Nominal Speed:
1600 rpm 24 V || 3400 rpm 48 V
Second Shaft:
without second shaft end
Warranty:
18 months
Product Certifications:
cUL || TÜV || UL
Circle Diameter Of The Mounting Holes:
66.6 mm
Motor Type:
AC Synchronous Servo Motor
Centring Collar Depth:
1.6 mm
Maximum Switching Current:
100 mA per output || 200 mA total
Voltage State 1 Guaranteed:
15...30 V
Catalog:
View
Datasheet:
View
  • Schneider Electric ILA2K572PC1A0 Lexium Ila Servomot 24 48V Eth Ip Enc
  • Schneider Electric ILA2K572PC1A0 Lexium Ila Servomot 24 48V Eth Ip Enc
$1,860.00

Description

This product is part of the Lexium ILA range, an offer of motion integrated drives for motion control. The motion integrated drive with a 6-pole AC synchronous servo motor features an integrated EtherNet/IP communication interface and untapped shaft without holding brake. It is an equipped with a single-turn encoder (16,384 points/turn). The AC synchronous servo motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 8500mA and a nominal speed of 3400RPM at 48V. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 163.8mm (length) x 57mm (width) and the centering collar dimensions are 1.6mm (depth) x 50mm (diameter) with 66.6mm mounting hole. It weighs 1.7kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose