- China Rohs Regulation:
- X
- Product Certifications:
- cUL || UL || TÃV
- Rotor Inertia:
- 430 kg.cm²
- Shock Resistance:
- 150 m/s² 1000 shocks IEC 60068-2-29
- Speed Feedback Resolution:
- 12 points/turn motor || 0.56° gearbox output
- Mounting Support:
- flange
- Relative Humidity:
- 15-85 % without condensation
- Vibration Resistance:
- 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
- Maximum Switching Current:
- 100 mA per output || 200 mA total
- Motor Flange Size:
- 66 mm
- Product Or Component Type:
- motion integrated drive
- Feedback Type:
- BLDC encoder
- Accuracy Error:
- +/- 1 point
- Number Of Mounting Holes:
- 2
- Maximum Supply Current:
- 0.1 A power stage disabled) || 6.8 A 24 V || 2.7 A 48 V
- Range Of Product:
- Lexium integrated drive
- Communication Interface:
- Ethernet/IP, Integrated
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Ambient Air Temperature For Storage:
- -25-70 °C
- Circularity Profile:
- ENVEOLI1411012EN
- Input/Output Type:
- 4 signals (each be used as input or output)
- Reduction Ratio:
- 54:1 (1715:32)
- Marking:
- CE
- Number Of Motor Stacks:
- 1
- Pvc Free:
- Yes
- Nominal Output Power:
- 45 W 24 V || 47 W 48 V
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating
- Shaft End:
- hole
- Motor Type:
- brushless DC motor
- Voltage State 1 Guaranteed:
- 15...30 V
- Mercury Free:
- Yes
- Voltage State 0 Guaranteed:
- -3...4.5 V
- Nominal Torque:
- 6 N.m 24 V || 6 N.m 48 V
- Permissible Ambient Air Temperature Around The Device:
- 105 °C power amplifier || 110 °C motor
- Discrete Input Current:
- 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
- Sustainable Offer Status:
- Green Premium product
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Transmission Rate:
- 125, 250, 500 kbauds
- Standards:
- EN 61800-3 : 2001-02 || IEC 61800-3, Ed 2 || EN 61800-3:2001, second environment || IEC 60072-1 || IEC 50347 || IEC 61800-3 || IEC 50178
- Net Weight:
- 2.3 kg
- Peak Stall Torque:
- 13.93 N.m 24 V || 13.93 N.m 48 V
- Holding Brake:
- without
- Ip Degree Of Protection:
- shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
- Type Of Cooling:
- natural convection
- Continuous Stall Torque:
- 8 N.m
- Electrical Connection:
- printed circuit board connector
- Centring Collar Diameter:
- 36 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Current Consumption:
- 7000 mA peak || 5500 mA maximum continuous
- Number Of Motor Poles:
- 6
- [Us] Rated Supply Voltage:
- 48 V || 24 V
- Phase:
- single phase
- Service Life In Hours:
- 6000 h bearing
- Maximum Radial Force Fr:
- 200 N
- Supply Voltage Limits:
- 18-55.2 V
- Protection Type:
- safe torque off || short circuit of the output voltage || overload of output voltage
- Maximum Mechanical Speed:
- 93 rpm
- Warranty:
- 18 months
- Detent Torque:
- 6.5 N.m
- Associated Fuse Rating:
- 16 A
- Device Short Name:
- ILE
- Discrete Output Voltage:
- 23...25 V
- Mounting Holes Diameter:
- 4.4 mm
- Network Type:
- DC
- Length:
- 229 mm
- Second Shaft:
- without second shaft end
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Rohs Exemption Information:
- Yes
- Maximum Axial Force Fa:
- 80 N
- Nominal Speed:
- 75 rpm 24 V || 75 rpm 48 V
- Environmental Disclosure:
- ENVPEP1411012EN
- Winding Type:
- medium speed of rotation and medium torque
- Commissioning Interface:
- RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
- Gear Box Type:
- worm gear, 3 stages
- Ambient Air Temperature For Operation:
- 40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)