Schneider Electric ILS1F573PC1A0 Lexium Ils Stepper Mot 24 36V Canop
Schneider Electric
$1,170.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ILS1F573PC1A0 Lexium Ils Stepper Mot 24 36V Canop
This product is part of the Lexium ILA, ILE, ILS range, an offer of motion integrated drives for motion control. The integrated motion drive with a 6-pole stepper motor features an integrated CANopen DS301 communication interface. It is equipped with a single turn encoder (16384 points/turn) and reference pulse sensor (zero marker). Integration of the motor and the control electronics reduces the installation costs. The 3-phase stepper motor with a rated supply voltage of 24V to 36V DC, a maximum current consumption of 8500mA and a nominal speed of 500RPM at 36V. It provides high speed of rotation and medium torque with untapped shaft end. It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 138.9mm (Length) x 57mm (Width), 8mm x 21mm shaft, centring collar dimensions are 1.6mm (Depth) x 38.1mm (Diameter) with 66.6mm circle diameter of the mounting hole. It weighs 2kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3, 2001, second environment, IEC 60072-1, EN/IEC 50178, EN 61800-3, 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, fieldbus and safety function in a single device. Each motor technology offers a wide range of applications for decentralised motion solutions. The following operating modes can be set via the communication bus such as electronic gearbox (for drive ILA1x57 with single turn encoder), speed profile, manual (JOG), point-to-point and homing.
- Rotor Inertia:
- 0.38 kg.cm²
- Maximum Switching Current:
- 100 mA per output || 200 mA total
- Discrete Output Voltage:
- 23...25 V
- Continuous Stall Torque:
- 1.5 N.m
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Rohs Exemption Information:
- Yes
- Shaft Diameter:
- 8 mm
- Number Of Motor Poles:
- 6
- Current Consumption:
- 3500 mA maximum
- Holding Brake:
- without
- Input/Output Type:
- 4 signals (each be used as input or output)
- Type Of Cooling:
- natural convection
- Vibration Resistance:
- 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
- Peak Stall Torque:
- 1.5 N.m
- Circle Diameter Of The Mounting Holes:
- 66.6 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Net Weight:
- 2 kg
- Mounting Holes Diameter:
- 5.2 mm
- Maximum Mechanical Speed:
- 3000 rpm
- Accuracy Error:
- +/- 6 arc min
- Centring Collar Depth:
- 1.6 mm
- Pvc Free:
- Yes
- Shock Resistance:
- 150 m/s² 1000 shocks IEC 60068-2-29
- Maximum Radial Force Fr:
- 50 N
- Mounting Support:
- flange
- Product Certifications:
- UL || cUL || TÃV
- Nominal Speed:
- 200 rpm 24 V || 500 rpm 36 V
- Marking:
- CE
- Electrical Connection:
- industrial connector
- Number Of Motor Stacks:
- 3
- Network Type:
- DC
- Transmission Rate:
- 50, 100, 125, 250, 500, 800 and 1000 kbauds
- Shaft Length:
- 21 mm
- Ip Degree Of Protection:
- shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
- Environmental Disclosure:
- ENVPEP1411002EN
- Circularity Profile:
- ENVEOLI1411002EN
- Centring Collar Diameter:
- 38.1 mm
- Discrete Input Current:
- 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
- Voltage State 1 Guaranteed:
- 15...30 V
- Protection Type:
- overload of output voltage || short circuit of the output voltage || safe torque off
- Service Life In Hours:
- 20000 h bearing
- China Rohs Regulation:
- X
- Mercury Free:
- Yes
- Device Short Name:
- ILS
- Winding Type:
- medium speed of rotation and medium torque
- Holding Torque:
- 1.7 N.m
- Maximum Axial Force Fa:
- 100 N tensile force) || 8.4 N force pressure)
- Associated Fuse Rating:
- 0.416666666666667
- Number Of Mounting Holes:
- 4
- Communication Interface:
- CANopen DS301, Integrated
- Relative Humidity:
- 15-85 % without condensation
- Nominal Torque:
- 1.5 N.m
- Motor Flange Size:
- 57 mm
- Ambient Air Temperature For Storage:
- -25-70 °C
- Length:
- 138.9 mm
- Feedback Type:
- index pulse
- Sustainable Offer Status:
- Green Premium product
- Shaft End:
- untapped
- Supply Voltage Limits:
- 18-40 V
- [Us] Rated Supply Voltage:
- 36 V || 24 V
- Speed Feedback Resolution:
- 20000 points/turn
- Motor Type:
- 3-phase stepper motor
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating
- Phase:
- single phase
- Gear Box Type:
- without
- Voltage State 0 Guaranteed:
- -3...4.5 V
- Permissible Ambient Air Temperature Around The Device:
- 105 °C power amplifier || 110 °C motor
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Product Or Component Type:
- motion integrated drive
- Ambient Air Temperature For Operation:
- 50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
- Second Shaft:
- without second shaft end
- Standards:
- EN 61800-3:2001, second environment || IEC 61800-3, Ed 2 || IEC 50178 || IEC 60072-1 || IEC 50347 || EN 61800-3 : 2001-02 || IEC 61800-3
- Warranty:
- 18 months
- Range Of Product:
- Lexium integrated drive
- Catalog:
- View
- Datasheet:
- View
