Schneider Electric

Schneider Electric JDA36250U33X Molded Case Circuit Breaker 600V 250A

(No reviews yet) Write a Review
SKU:
JDA36250U33X
UPC:
785901133735
Condition:
New
Warranty:
18 months
Product Name:
PowerPact J
Mounting Support:
bracket
Quality Labels:
CE
Environmental Disclosure:
ENVPEP2206032EN
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Control Type:
toggle
Mercury Free:
Yes
Net Weight:
2.4 kg
Breaking Capacity Code:
D
Range:
PowerPact
Continuous Current Rating:
0.8
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Device Application:
distribution
Terminal Identifier:
AL250JD
Height:
191 mm
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pollution Degree:
3 IEC 60947-1
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Utilisation Category:
category A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Poles Description:
3P
Rohs Exemption Information:
Yes
Product Or Component Type:
circuit breaker
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Operation:
-2-70 °C
Eu Rohs Directive:
Compliant with Exemptions
Ambient Air Temperature For Storage:
-50-85 °C
Width:
104 mm
Product Certifications:
UL || CSA || NOM
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Network Frequency:
50/60 Hz
Ip Degree Of Protection:
front cover IP40
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Phase Connection:
CA
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Depth:
86 mm
Suitability For Isolation:
yes IEC 60947-2
Pvc Free:
Yes
Circularity Profile:
ENVEOLI2206032EN
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Wire Stripping Length:
25 mm
Trip Unit Name:
MicroLogic 3.2 S
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Circuit Breaker Application:
HACR rated
Protection Type:
overload protection || short-circuit protection
Mounting Height:
4.5 in
Electrical Connection:
I-Line connection, line || lugs, load
Communication Interface:
Modbus || Ethernet
Line Rated Current:
250-250 A
Mounting Mode:
I-Line bracket)
Brochure:
View
Catalog:
View
Datasheet:
View
$3,398.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 14kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose