Schneider Electric JJL36250CU44X Molded Case Circuit Breaker 600V 250A

(No reviews yet) Write a Review
SKU:
JJL36250CU44X
UPC:
7.85901E+11
Condition:
New
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Utilisation Category:
category A
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Net Weight:
2.4 kg
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Pvc Free:
Yes
Mounting Mode:
unit mount lug)
Suitability For Isolation:
yes IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Control Type:
toggle
Circuit Breaker Application:
HACR rated
Continuous Current Rating:
1
Terminal Identifier:
AL250JD
Product Or Component Type:
circuit breaker
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Poles Description:
3P
Line Rated Current:
250-250 A
Environmental Disclosure:
ENVPEP2206032EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Wire Stripping Length:
25 mm
Pollution Degree:
3
Trip Unit Technology:
electronic, ammeter, MicroLogic 6.2 A, LSIG
Electrical Connection:
lugs, line || lugs, load
Width:
104 mm
Eu Rohs Directive:
Compliant with Exemptions
Mounting Support:
lug
Ambient Air Temperature For Storage:
-50-85 °C
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Depth:
86 mm
Circularity Profile:
ENVEOLI2206032EN
Mercury Free:
Yes
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sustainable Offer Status:
Green Premium product
Breaking Capacity Code:
J
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Warranty:
18 months
Rohs Exemption Information:
Yes
Product Certifications:
UL || CSA || NOM
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Quality Labels:
CE
Communication Interface:
Modbus
Height:
191 mm
Protection Type:
overload protection || short-circuit protection
Ip Degree Of Protection:
front cover IP40
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Ambient Air Temperature For Operation:
-2-70 °C
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Network Frequency:
50/60 Hz
Trip Unit Name:
MicroLogic 6.2 A
  • Schneider Electric JJL36250CU44X Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JJL36250CU44X Molded Case Circuit Breaker 600V 250A
$8,747.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Ammeter with a 6.2A trip unit and an LSIG function with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 100%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose