Schneider Electric JJP36200 Molded Case Circuit Breaker 600V 200A
Schneider Electric
$5,432.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric JJP36200 Molded Case Circuit Breaker 600V 200A
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This unit has terminal nuts on the line side and lugs on the load side. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- Terminal Identifier:
- AL250JD
- Line Rated Current:
- 200-200 A
- Sustainable Offer Status:
- Green Premium product
- Magnetic Tripping Current:
- 2000-2000 A
- Long Time Pick-Up Adjustment Range:
- 0.25...1 x In
- Pvc Free:
- Yes
- Mounting Mode:
- unit mount lug)
- Operating Altitude:
- < 6561.68 ft (2000 m) without derating || 5000 m with derating
- Trip Unit Technology:
- thermal-magnetic
- Poles Description:
- 3P
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- Network Frequency:
- 50/60 Hz
- Mercury Free:
- Yes
- Utilisation Category:
- category A
- Magnetic Hold Current:
- 1000 A
- Mounting Support:
- lug
- Circularity Profile:
- ENVEOLI2206031EN
- Communication Interface:
- Modbus
- Environmental Disclosure:
- ENVPEP2206031EN
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947-2
- Depth:
- 86 mm
- Protection Type:
- overload protection || short-circuit protection
- Product Certifications:
- UL || CSA || NOM
- Breaking Capacity:
- 100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
- Breaking Capacity Code:
- J
- Circuit Breaker Application:
- HACR rated
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Number Of Slots:
- 2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
- Width:
- 104 mm
- [Ui] Rated Insulation Voltage:
- 750 V IEC 60947-2
- Ip Degree Of Protection:
- front cover IP40
- Suitability For Isolation:
- yes IEC 60947-2
- Electrical Connection:
- terminal nut, line || lugs, load
- Local Signalling:
- switched off (OFF) 1 trip indicator green)
- Rohs Exemption Information:
- Yes
- Quality Labels:
- CE
- Product Or Component Type:
- circuit breaker
- Wire Stripping Length:
- 25 mm
- Net Weight:
- 2.4 kg
- Tightening Torque:
- 25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
- Warranty:
- 18 months
- Control Type:
- toggle
- Continuous Current Rating:
- 0.8
- Pollution Degree:
- 3
- Ambient Air Temperature For Operation:
- -2-70 °C
- [Ics] Rated Service Breaking Capacity:
- 65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
- Standards:
- UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
- [Ue] Rated Operational Voltage:
- 600 V AC 50/60 Hz IEC 60947-3
- Ambient Air Temperature For Storage:
- -50-85 °C
- Awg Gauge:
- AWG 3/0...350 kcmil aluminium/copper terminals
- Height:
- 191 mm
- Eu Rohs Directive:
- Compliant with Exemptions
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
