Schneider Electric JLA36250U33X Molded Case Circuit Breaker 600V 250A

(No reviews yet) Write a Review
SKU:
JLA36250U33X
UPC:
785901951124
Condition:
New
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Eu Rohs Directive:
Compliant with Exemptions
Environmental Disclosure:
ENVPEP2206032EN
Depth:
86 mm
Utilisation Category:
category A
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Height:
191 mm
Mounting Height:
4.5 in
Mounting Support:
bracket
Ip Degree Of Protection:
front cover IP40
Warranty:
18 months
Terminal Identifier:
AL250JD
Breaking Capacity:
125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Width:
104 mm
Circuit Breaker Application:
HACR rated
Net Weight:
2.4 kg
Phase Connection:
ABC
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Continuous Current Rating:
0.8
Circularity Profile:
ENVEOLI2206032EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Wire Stripping Length:
25 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Line Rated Current:
250-250 A
Pvc Free:
Yes
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Poles Description:
3P
Ambient Air Temperature For Operation:
-2-70 °C
Electrical Connection:
I-Line connection, line || lugs, load
Network Frequency:
50/60 Hz
Ambient Air Temperature For Storage:
-50-85 °C
Product Certifications:
UL || CSA || NOM
Protection Type:
overload protection || short-circuit protection
Mounting Mode:
I-Line bracket)
Sustainable Offer Status:
Green Premium product
Pollution Degree:
3
Product Or Component Type:
circuit breaker
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Control Type:
toggle
Quality Labels:
CE
Rohs Exemption Information:
Yes
Communication Interface:
Modbus
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Trip Unit Name:
MicroLogic 3.2 S
Breaking Capacity Code:
L
Mercury Free:
Yes
  • Schneider Electric JLA36250U33X Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JLA36250U33X Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JLA36250U33X Molded Case Circuit Breaker 600V 250A
$7,994.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 50kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose