
Schneider Electric JLN36000S25ABSO Automatic Molded Case Switch 600V 250A
Schneider Electric
$4,424.00
PowerPacT J-Frame automatic switches are a disconnect device and can be used to open and close a circuit under normal operating conditions. The automatic switches are similar in construction, use the same accessories, and offer the same connection possibilities as the J-Frame circuit breaker version. The switches have a factory set, nonadjustable trip point calibrated to protect the molded case switch. The automatic switch can make and break its rated current. For an overload or a short circuit, it must be protected by an upstream device. PowerPacT J-Frame switches are available in unit mount, I-Line, plug-in, or drawout versions. This switch is a plug in unit. This PowerPacT J, 250A, 3 pole, automatic switch has a short circuit withstand current rating of 50kA at 600VAC. PowerPacT J automatic switches comply to UL and CSA standards. This unit includes a factory installed 2A/2B auxiliary switch and 24VDC shunt trip.
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Electrical Connection:
- plug-in, line || plug-in, load
- Mercury Free:
- Yes
- Width:
- 4.12 in
- Magnetic Tripping Current:
- 3125-3125 A
- Trip Unit Technology:
- magnetic
- Accessory / Separate Part Type:
- shunt trip 24 V DC || auxiliary switch 2 NO + 2 NC
- Height:
- 7.52 in
- Depth:
- 5 in
- Circularity Profile:
- ENVEOLI2206031EN
- Pvc Free:
- Yes
- Environmental Disclosure:
- ENVPEP2206031EN
- Rohs Exemption Information:
- Yes
- Awg Gauge:
- x AWG 3/0...350 kcmil ( aluminium/copper )
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Line Rated Current:
- 250 A
- Warranty:
- 18 months
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- Tightening Torque:
- 26-26 N.m 95-185 mm² (AWG 3/0...350 kcmil)
- Poles Description:
- 3P
- Breaking Capacity Code:
- L
- Product Certifications:
- CSA || CCC || UL Listed || NMX || CE || IEC
- Terminal Identifier:
- AL250JD
- Short-Circuit Withstand:
- 125 kA 240 V UL 489 || 100 kA 480 V UL 489 || 50 kA 600 V UL 489 || 20 kA 250 V UL 489
- Product Or Component Type:
- automatic switch
- Mounting Mode:
- plug-in
- Range Of Product:
- PowerPact J
- Sustainable Offer Status:
- Green Premium product
- [Ue] Rated Operational Voltage:
- 600 V AC || 250 V DC
- Eu Rohs Directive:
- Compliant with Exemptions
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View